Waste Gas Incinerator
We specialize in treating VOCs, odors, and toxic and harmful waste gases, providing a variety of Waste Gas Incinerator systems including RTO, RCO, CO, TO, and SCR, with an efficiency of >99% and fully meeting global emission standards.
Regenerative Thermal Oxidizers (RTO)
Catalytic Oxidizer (CO)
Thermal Oxidizer (TO)
Selective Catalytic Reduction (SCR)
Regenerative Catalytic Oxidizer (RCO)
VOCs, Foul Odors, Toxic Gases? A One-stop Incineration Solution is Here
With accelerated industrialization, large quantities of VOCs, odorous gases, and toxic and harmful waste gases are released into the atmosphere, severely polluting the environment and threatening human health and ecological security. Faced with increasingly stringent environmental regulations, enterprises urgently need efficient and reliable waste gas treatment solutions.
Waste Gas Incinerators are the core technology for addressing this challenge—through high-temperature oxidation or catalytic decomposition, complex pollutants are completely transformed into harmless substances, achieving ultra-low emissions and stable compliance. We provide a full range of solutions covering RTO, RCO, CO, TO, and SCR to help enterprises achieve green transformation and protect our blue skies and clean land.
One-stop Exhaust Gas Treatment Solution
Regenerative Thermal Oxidizers (RTO)
Highly Efficient and Energy-Saving VOCs Treatment: The Preferred Solution
Catalytic Oxidizer (CO)
Energy Saving + Catalytic Advantages for More Thorough Cost Reduction and Efficiency Improvement
Regenerative Catalytic Oxidizer (RCO)
Low-Temperature, High-Efficiency, Precise Decomposition of Complex Waste Gases
Selective Catalytic Reduction (SCR)
Precise Denitrification: A Key Technology for Protecting Blue Skies
Thermal Oxidizer (TO)
High-Energy Incineration Solution for High-Calorific-Value Waste Liquids/Gas
What is Waste Gas Incinerator?
Overview
An industrial waste gas incinerator is an environmental protection device specifically designed for the high-temperature oxidation or catalytic decomposition of harmful waste gases (such as VOCs, odorous gases, and toxic organic compounds) generated during industrial production processes. Its core objective is to completely convert complex pollutants into carbon dioxide, water vapor, and other harmless substances, achieving safe and compliant emissions.
Basic Working Principle
After the waste gas enters the incineration system, it undergoes an oxidation reaction at high temperatures (typically 750°C–1100°C) or under the action of a catalyst, completely “burning” the organic pollutants. Depending on the composition, concentration, and calorific value of the waste gas, the system can select thermal oxidation, catalytic oxidation, or a combination of processes, and significantly reduce energy consumption and improve overall energy efficiency through heat recovery devices (such as heat storage media).
Customized Waste Gas Treatment Solutions
| Product Type | Typical Applications | Capacity Range | Key Advantages |
|---|---|---|---|
| RTO (Regenerative Thermal Oxidizer) | Painting, printing, chemical, electronics industries with large-volume, low-concentration VOC emissions | Airflow: 1,000–100,000 Nm³/h Destruction Efficiency: ≥99% |
Heat recovery efficiency up to 95%+, low operating cost, high reliability |
| RCO (Regenerative Catalytic Oxidizer) | Medium-to-low concentration VOCs and odors where energy savings and low-temperature operation are critical | Airflow: 2,000–50,000 Nm³/h Operating Temp: 250–400°C |
Significant energy savings, long catalyst life, minimal NOx formation |
| CO (Catalytic Oxidizer) | Small-to-medium airflow streams with toxic or hard-to-degrade organics (e.g., benzene, ketones) | Airflow: 500–20,000 Nm³/h Destruction Efficiency: ≥98% |
Compact footprint, fast start-up, easy operation |
| TO (Thermal Oxidizer) | High-concentration waste gas, liquid waste, or hazardous streams containing Cl, F, Br, etc. | Handles high calorific values Combustion Temp: ≥1100°C |
Complete destruction, prevents dioxin formation, high safety standard |
| SCR (Selective Catalytic Reduction System) | NOx removal from boiler flue gas, gas turbines, or incinerator exhaust | Inlet NOx: ≤2000 mg/Nm³ NOx Removal Efficiency: ≥90% |
Meets ultra-low emission standards, supports carbon neutrality goals |
All systems support automated control, remote monitoring, and predictive fault alerts, and can be engineered to comply with local environmental regulations—including China’s GB standards, EU IPPC, U.S. EPA, and more.
Custom Engineering – Beyond Off-the-Shelf Equipment
We understand: no two facilities emit identical waste gas. That’s why we follow a “one plant, one solution” approach, offering end-to-end customization. Whether you’re building a new facility or upgrading existing operations, we deliver efficient, compliant, and sustainable air pollution control solutions—from concept to long-term operation
Exhaust Characterization & Process Analysis
On-site sampling and data modeling to precisely define gas composition and operating conditions
Optimized Technology Selection
Recommend the ideal system configuration (e.g., RTO + SCR, TO + waste heat boiler)
Modular Design & Fast Deployment
Standardized components with flexible integration—reducing project timelines by up to 30%
Installation, Commissioning & Lifecycle Support
Training, spare parts, annual maintenance, and performance upgrades included
Real Cases
Case Study 1: Germany – Baden-Württemberg
Background: The company produces pharmaceutical intermediates, generating complex off-gas containing chlorobenzene, toluene, and trace phosgene at a flow rate of ~18,000 Nm³/h. Their previous system—activated carbon adsorption followed by catalytic oxidation—required frequent carbon replacement and failed to meet the EU Industrial Emissions Directive (IED) limit for halogenated VOCs (<10 mg/m³).
How They Found Us: Discovered our expertise in halogenated VOC treatment with RTOs at the 2023 ACHEMA trade fair in Frankfurt and initiated a technical consultation.
Our Solution:
- Three-chamber Regenerative Thermal Oxidizer (RTO) coupled with a NaOH scrubber for acid gas removal
- Combustion chamber maintained at ≥850°C with ≥2-second residence time to prevent dioxin precursor formation
- Integrated online GC-FID monitoring and LEL safety interlock system
Results Achieved:
- Consistent total VOC emissions at 6.2 mg/m³ (well below the 10 mg/m³ limit)
- HCl removal efficiency >99.5%, eliminating corrosion risks
- Annual operating costs reduced by €180,000 (mainly from lower energy and consumables)
- Successfully passed TÜV environmental audit and earned points toward “Green Factory” certification
“Their engineers understand not just technology, but also EU regulations. The entire process—from design to acceptance—was transparent. Today, our abatement system is the quietest and most reliable unit in the plant.”
— Dr. Markus Weber, EHS Director, Schmidt Chemie GmbH
Case Study 2: Japan – Osaka Prefecture
Background: During semiconductor packaging cleaning, the facility used isopropyl alcohol (IPA) and acetone, producing intermittent high-concentration VOC streams (peaking at 8,000 ppm). Their existing thermal oxidizer consumed excessive fuel and frequently tripped due to load fluctuations.
How They Found Us: Referred by the Japan Environmental Industry Association (JEIA), they selected us after evaluating multiple vendors—particularly impressed by our patented control algorithm for stable low-temperature RCO operation.
Our Solution:
- Custom dual-chamber Regenerative Catalytic Oxidizer (RCO) with intelligent airflow modulation and concentration dilution
- Sulfur-tolerant precious-metal catalyst to handle trace sulfur impurities
- Fully integrated with the plant’s MES for synchronized start/stop with production lines
Results Achieved:
- Stable operation at 280–350°C, reducing energy consumption by 42%
- Continuous VOC destruction efficiency >99.2% with zero compliance violations
- Zero unplanned downtime over 18 months of operation
- Qualified for Osaka Prefecture’s “Energy-Saving Equipment Subsidy Program”
“Before, we had to manually adjust parameters every time we switched products. Now it runs fully automatically—even night shifts are worry-free. The Chinese engineering team responds faster than some local suppliers.”
— Mr. Kenji Sato, Plant Manager, Tanaka Precision
Technical Support & After-Sales Service
End-to-End Care for Peak Performance, Every Day
A high-performance Waste Gas Incinerator demands more than great engineering—it requires ongoing expert support and dependable after-sales service. That’s why we’ve built a comprehensive lifecycle support system to ensure your system runs safely, efficiently, and compliantly—year after year.
Installation Guidance
On-site or remote supervision by certified engineers to ensure correct assembly, piping, and safety compliance.
Commissioning & Acceptance
Full cold/hot commissioning with third-party emission testing to guarantee performance and regulatory approval.
Operator Training
Customized training on startup/shutdown procedures, routine inspections, parameter tuning, and emergency response.
Technical Documentation
Complete manuals, maintenance checklists, electrical schematics, and spare parts catalogs provided at handover.
24/7 Rapid Response
Dedicated hotline and digital ticketing system—issues acknowledged within 2 hours, solutions delivered within 24 hours.
Genuine Spare Parts Network
Critical spare parts are provided free of charge during the warranty period, with delivery within 7-10 days to minimize downtime.
Remote Diagnostics & Upgrades
Real-time monitoring enables predictive maintenance and over-the-air performance optimizations.
Preventive Maintenance Programs
Scheduled servicing (e.g., ceramic bed cleaning, catalyst activity checks, valve calibration) to maximize uptime and lifespan.
Compliance is the Floor. Excellence is the Goal.
Dramatic reduction of hazardous emissions
Achieves >99% destruction efficiency for VOCs, benzene derivatives, hydrogen sulfide, halogenated compounds, and other toxic air pollutants.
Prevents secondary pollution
Advanced temperature control and rapid quenching suppress formation of dioxins, furans, and other hazardous byproducts.
Energy recovery & carbon reduction
RTO/RCO systems capture waste heat for process heating or power generation—saving hundreds of tons of coal equivalent annually and lowering Scope 1 emissions.
Global Compliance – Exceeding Standards
Our systems are engineered to meet—and often exceed—key international and local emission regulations, including:
- China’s GB 16297 and provincial VOCs emission limits
- EU Industrial Emissions Directive (IED 2010/75/EU) and BAT conclusions
- U.S. EPA Methods 25/25A, NSPS Subpart OOOOa, and NESHAP requirements
- Full alignment with ISO 14001 environmental management frameworks
Empowering Your ESG & Net-Zero Journey
Clients using our solutions gain more than clean air—they achieve strategic advantages:
- Strengthened ESG ratings and corporate reputation
- Compliance with stringent supply chain requirements (e.g., Apple, BASF, Tesla)
- Eligibility for green factory certification, carbon trading, and clean production audits
EN 
ZH 
ES 
AR 
ID 
PT 
FR 
JA 
RU 
DE 
MS 
CS 
BG 
NL 
KO 
RO 
SK 
TH 
VI 
ZH_TW 
UK