Základní informace.

Model NO.

RTO

Typ

Nástroj pro monitorování životního prostředí

Hlavní funkce

Odstraňování odpadních plynů

Aplikace

Chemický průmysl

Značka

Raidsant

Čistá účinnost

99.8%

Stav

Nový

Ochranná známka

Raidsant

Přepravní balíček

Film zabalený

Původ

Zhejiang Čína

Popis produktu

HangZhou Raidsant Machinery Co.;,; Ltd.; se specializuje na vývoj a výrobu inovativních práškových chladicích peletizačních strojů a souvisejících průmyslových strojů na zpracování odpadních plynů.; S téměř 20letou historií výroby; máme dobrý trh ve více než 20 provinciích v Číně; a některé z našich výrobků byly vyváženy do Saúdské Arábie, Singapuru, Mexika,; Brazílie,;Španělsko,; Amerika,; Rusko a Korea; atd.;

Specifikace:;

* Kompaktnější než stávající zařízení 
* Nízké provozní náklady 
* Dlouhá životnost zařízení 
* Žádné změny tlaku

Účel:;

Energeticky úsporný systém, který spaluje těkavé organické sloučeniny (VOC); a odpadní plyn využitím tepla; a shromažďuje přes 99.;8 % odpadního tepla výfukových plynů pomocí keramických regeneračních materiálů (katalyzátor); s velkým povrchem a nízkou tlakovou ztrátou.;

Aplikace:;

1.; Proces sušení malby
2.; proces tisku kovů
3.; proces sušení vláken
4.; proces lepicí pásky
5.; proces zpracování odpadu
6.; proces výroby polovodičů
7.; kouř,; cukrářský a pečicí proces
8.; petrochemický proces; 
9.; proces výroby léků a potravin; 
10.; jiný proces generování VOC

Zásluhy:;

 * Kompaktnější než stávající zařízení
 * Žádné změny tlaku
 * Vysoká míra rekuperace tepla (přes 95 %);
 * Perfektní VOC úprava (přes 99.;8%);
  * Dlouhá životnost zařízení
  * Nízké provozní náklady
  * Lze vyrobit v kruhu nebo čtyřúhelníku

Obecné popisy a vlastnosti:; 

1.; Princip fungování
 Provozní metoda, která neustále mění výboje otáčením rotačního ventilu

2.; Změna procesního tlaku
  Žádná změna tlaku, protože směr větru se mění v pořadí rotací rotačního ventilu

3.; Investiční náklady
 Přibližně 70 % typu postelí

4.; Instalační prostor
 Jedná se o jednu nádobu, takže je kompaktní a vyžaduje méně instalačního prostoru.;

5.; Údržba
 Je snadné jej udržovat, protože rotační ventil je jedinou pohyblivou částí.;
 Těsnicí část rotačního ventilu je zřídka opotřebovaná, protože se otáčí nízkou rychlostí.;

6.; Stabilita
Žádná rizika v procesu, protože je vždy otevřen, i když má rotační ventil problémy.;

7.; Účinnost léčby
 Účinnost ošetření zůstává zachována, protože těsnicí část je zřídka opotřebována, i když je provozována po dlouhou dobu.;

 

Adresa: No.3, Zhenxin Middle Road, Zóna ekonomického rozvoje, HangZhou, ZheJiang

Typ podnikání: Výrobce/Továrna, Obchodní společnost

Rozsah podnikání: chemikálie, elektrika a elektronika, výrobní a zpracovatelské stroje, bezpečnost a ochrana

Certifikace systému managementu: ISO 9001

Hlavní produkty: peletizátor, vločkovač, pastilátor, granulátor, chemický peletizátor, voc

Představení společnosti: HangZhou Raidsant Machinery Co., Ltd., dříve nazývaná HangZhou Xinte Plastic Machinery Factory, se specializuje na výrobu inovativních strojů na recyklaci plastů. S téměř 20letými zkušenostmi máme dobrý trh ve 20 provinciích v Číně a některé naše výrobky byly exportovány do Indonésie, Ruska a Vietnamu atd. Mezi naše hlavní produkty patří DZ Type Pastillator, linka na recyklaci odpadních pneumatik, Big Caliber Plastic Linka na recyklaci drtičů trubek, kontinuální žíhací stroj na pocínování, QX typ PET, linka na mytí PE a trupu, drtič recyklace plastů SDP s dvojitou kolejnicí, výroba granulí pro řezání za tepla SJ jednotka, produktová řada PVC trubice (cinquefoil), produktová řada PVC Odd-tvarovaný materiál pro dveře a okna, produktová řada granulí ve vodě a Shredder pro plasty a recyklaci. Získali jsme 5 technických patentů.

Naše společnost klade důraz na technickou rekonstrukci, dováží pokročilé technologie z domova i ze zahraničí a neustále vyvíjí nové produkty. Naše zásada je náročná na vysokou kvalitu a nabízíme ty nejlepší produkty. Snažíme se realizovat náš slogan. Spokojenost našich zákazníků je naší věčnou snahou.

Hledáme zahraniční zákazníky nebo agenty. Pokud vás náš návrh zaujal, dejte nám prosím vědět, který z našich produktů vás nebo vaše zákazníky nejvíce osloví. Byli bychom vám velmi vděční, kdybyste nám poskytli nějaké představy o perspektivách trhu pro naše produkty. Doufáme, že se od vás brzy dozvíme příznivé informace! Naším cílem je, abychom si s vámi mohli vybudovat dobrý vztah nyní nebo v blízké budoucnosti. V případě jakýchkoli dotazů nebo požadavků nás prosím neváhejte kontaktovat.

Upřímně vás také vítáme v naší společnosti, abyste s námi diskutovali o podnikání a vyjednávali. Pro další rozšiřování našeho trhu a zákazníků naše společnost vítá zákazníky z domova i ze zahraničí v gestu nové značky na základě zcela nové koncepce řízení – kvalita, čest, služby. Hledáme systém řízení jakosti ISO 90001, abychom splnili požadavky našich zákazníků!

regenerační tepelná oxidační činidla

Can a regenerative thermal oxidizer be retrofitted into an existing facility?

Yes, regenerative thermal oxidizers (RTOs) can be retrofitted into existing facilities under certain conditions. Retrofitting an RTO involves integrating the system into the existing infrastructure and process flow of the facility to control emissions from industrial processes. However, the feasibility of retrofitting an RTO depends on several factors related to the facility and the specific requirements of the application.

Here are some considerations for retrofitting an RTO into an existing facility:

  • Space Availability: RTOs typically require a significant amount of physical space for installation. It’s important to assess whether the facility has adequate space to accommodate the size and layout requirements of the RTO system. This includes considering the space needed for the RTO unit itself, associated ductwork, auxiliary systems, and access for maintenance.
  • Process Integration: Retrofitting an RTO involves integrating the system into the existing industrial process. This integration may require modifications to the process flow, such as rerouting ductwork, adding or modifying exhaust points, or coordinating with existing pollution control equipment. The compatibility of the RTO with the existing process and the ability to seamlessly integrate the system should be evaluated.
  • Auxiliary Systems: In addition to the RTO unit, auxiliary systems may be required for effective operation and compliance. These systems can include pre-treatment equipment such as scrubbers or filters, heat recovery units, monitoring and control systems, and stack emissions monitoring equipment. The availability of space and compatibility with existing infrastructure should be considered for accommodating these auxiliary systems.
  • Utility Requirements: RTOs have specific utility requirements, such as the need for natural gas or electricity for heating the combustion chamber and operating the control system. The availability and capacity of utilities at the existing facility should be assessed to ensure they can meet the demands of the RTO system.
  • Structural Considerations: The structural integrity of the facility should be evaluated to determine if it can support the additional weight of the RTO and associated equipment. This assessment may involve consulting with structural engineers and considering any necessary reinforcements or modifications.
  • Regulatory Compliance: Retrofitting an RTO may require obtaining permits and complying with environmental regulations. It is essential to assess the applicable regulations and ensure that the retrofit meets the necessary compliance requirements for emissions control.

It is important to consult with experienced engineering firms or RTO manufacturers who can assess the specific requirements and constraints of the facility. They can provide detailed evaluations, feasibility studies, and design recommendations for retrofitting an RTO into an existing facility. Their expertise can help ensure that the retrofit is successful, cost-effective, and compliant with environmental regulations.

regenerační tepelná oxidační činidla

What are the typical construction materials used in regenerative thermal oxidizers?

Regenerative thermal oxidizers (RTOs) are constructed using various materials that can withstand the high temperatures, corrosive environments, and mechanical stresses encountered during operation. The choice of materials depends on factors such as the specific design, process conditions, and the types of pollutants being treated. Here are some typical construction materials used in RTOs:

  • Heat Exchangers: The heat exchangers in RTOs are responsible for transferring heat from the outgoing exhaust gas to the incoming process air or gas stream. The construction materials for heat exchangers often include:
    • Ceramic Media: RTOs commonly use structured ceramic media, such as ceramic monoliths or ceramic saddles. These materials have excellent thermal properties, high resistance to thermal shock, and good chemical resistance. Ceramic media provide a large surface area for efficient heat transfer.
    • Metallic Media: Some RTO designs may incorporate metallic heat exchangers made from alloys such as stainless steel or other heat-resistant metals. Metallic media offer robustness and durability, particularly in applications with high mechanical stresses or corrosive environments.
  • Combustion Chamber: The combustion chamber of an RTO is where the oxidation of pollutants takes place. The construction materials for the combustion chamber should be able to withstand the high temperatures and corrosive conditions. Commonly used materials include:
    • Refractory Lining: RTOs often have refractory lining in the combustion chamber to provide thermal insulation and protection. Refractory materials, such as high-alumina or silicon carbide, are chosen for their high-temperature resistance and chemical stability.
    • Steel or Alloys: The structural components of the combustion chamber, such as the walls, roof, and floor, are typically made of steel or heat-resistant alloys. These materials offer strength and stability while withstanding the high temperatures and corrosive gases.
  • Ductwork and Piping: The ductwork and piping in an RTO transport the exhaust gas, process air, and auxiliary gases. The materials used for ductwork and piping depend on the specific requirements, but commonly used materials include:
    • Mild Steel: Mild steel is often used for ductwork and piping in less corrosive environments. It provides strength and cost-effectiveness.
    • Stainless Steel: In applications where corrosion resistance is crucial, stainless steel, such as 304 or 316 grades, may be used. Stainless steel offers excellent resistance to many corrosive gases and environments.
    • Corrosion-Resistant Alloys: In highly corrosive environments, corrosion-resistant alloys like Hastelloy or Inconel may be employed. These materials provide exceptional resistance to a wide range of corrosive chemicals and gases.
  • Insulation: Insulation materials are used to minimize heat loss from the RTO and ensure energy efficiency. Common insulation materials include:
    • Ceramic Fiber: Ceramic fiber insulation offers excellent thermal resistance and low thermal conductivity. It is often used in RTOs to reduce heat loss and improve overall energy efficiency.
    • Mineral Wool: Mineral wool insulation provides good thermal insulation and sound absorption properties. It is commonly used in RTOs to reduce heat loss and enhance safety.

It is important to note that the specific materials used in RTO construction may vary depending on factors such as the process requirements, temperature range, and corrosive nature of the gases being treated. Manufacturers of RTOs typically select appropriate materials based on their expertise and the specific application.

regenerační tepelná oxidační činidla

What are the maintenance requirements for a regenerative thermal oxidizer?

Maintaining a regenerative thermal oxidizer (RTO) is essential to ensure its optimal performance, longevity, and compliance with environmental regulations. Here are some key maintenance requirements for an RTO:

  • Regular Inspections: Conduct routine inspections to identify any signs of wear, corrosion, or damage to the RTO components. This includes inspecting valves, dampers, fans, combustion chambers, heat exchangers, and ceramic media beds. Inspections help detect potential issues early and allow for timely repairs or replacements.
  • Cleaning and Replacement of Components: Clean or replace components as needed to maintain proper functionality. This may include cleaning clogged or fouled heat exchanger surfaces, replacing damaged or worn-out valves and dampers, and periodically replacing the ceramic media beds if they become degraded or contaminated.
  • Monitoring Operating Parameters: Regularly monitor and record operating parameters such as temperature, airflow, pressure differentials, and gas concentrations. Deviations from normal operating ranges can indicate potential problems or inefficiencies that require attention.
  • Calibration of Instruments: Calibrate instruments and sensors used for monitoring and control purposes to ensure accurate measurement of parameters such as temperature, pressure, and flow rates. Proper calibration helps maintain reliable and precise operation of the RTO.
  • Cleaning of Heat Recovery System: Clean the heat recovery system, including the heat exchanger surfaces, to remove any accumulated particulate matter or fouling. This ensures efficient heat transfer and prevents the buildup of deposits that can reduce the RTO’s performance.
  • Compliance with Safety Standards: Adhere to safety standards and guidelines for working with the RTO. This includes proper lockout/tagout procedures during maintenance activities, wearing appropriate personal protective equipment, and following safety protocols to minimize risks to personnel and equipment.
  • Documentation and Record-Keeping: Maintain comprehensive records of maintenance activities, inspections, repairs, and any modifications made to the RTO. Documentation helps track the equipment’s history, aids in troubleshooting, and provides a record of compliance with regulatory requirements.

It’s important to note that the specific maintenance requirements may vary depending on the RTO manufacturer’s recommendations, the design of the system, the operating conditions, and applicable regulatory requirements. Following the manufacturer’s guidelines, conducting regular inspections, and implementing a proactive maintenance program tailored to the specific RTO are crucial for ensuring its reliable operation and longevity.

China Best Sales Regenerative Thermal Oxidizer
editor by CX 2024-03-12

cs_CZCS