China high quality Regenerative Thermal Oxidizer

基本訊息

型號

RTO

類型

環境監測儀器

品牌

雷德桑特

狀態

新的

清潔效率

99.8%

應用

化工

主要功能

廢氣去除

商標

雷德桑特

運輸套餐

薄膜包裹

起源

中國 浙江

產品描述

杭州瑞德森機械有限公司;,;有限公司；專業開發製造創新粉末冷卻造粒機械及相關工業廢氣處理設備。具有近20年的生產歷史；我們在中國20多個省份擁有良好的市場；部分產品出口沙烏地阿拉伯、新加坡、墨西哥、巴西，；西班牙，；美國，;俄羅斯和韓國； ETC。

規格：;

* 比現有設施更緊湊 
* 營運成本低 
* 設施使用壽命長 
* 壓力無變化

目的：;

燃燒揮發性有機化合物（VOC）的節能係統；利用熱量產生廢氣；採用陶瓷蓄熱材料（催化劑）收集99.;8%以上的廢氣餘熱；表面積大，壓力損失低；

應用：；

1.;塗裝乾燥工藝
2.;金屬印刷工藝
3.;纖維乾燥過程
4.;膠帶工藝
5.;廢棄物處理工藝
6.;半導體製造工藝
7.;抽煙，;糖果和烘焙過程
8.;石化過程； 
9.;醫藥和食品製造過程； 
10.;其他VOC產生過程

優點：；

 * 比現有設施更緊湊
 * 壓力無變化
 * 熱回收率高（95%以上）；
 * 完善的VOC處理（99.;8%以上）；
  * 設施使用壽命長
  * 營運成本低
  * 可製作圓形或四邊形

一般描述與特點：； 

1.;工作原理
 透過旋轉旋轉閥連續改變流量的操作方法

2.;過程壓力變化
  由於旋轉閥的旋轉，風向會發生順序變化，因此壓力不會變化

3.;投資成本
 約 70% 的床型

4.;安裝空間
 它是單一容器，因此結構緊湊，需要的安裝空間較小。

5.;維護
 由於旋轉閥是唯一的 1 個移動部件，因此易於維護。
 旋轉閥由於旋轉速度低，密封件很少磨損；

6.;穩定
在此過程中沒有風險，因為即使旋轉閥出現故障，它也始終打開。

7.;處理效率
 即使長時間運行，密封件也很少磨損，處理效率得以維持；

地址：浙江省杭州市經濟開發區振新中路3號

業務類型: 製造商/工廠, 貿易公司

業務範圍：化工、電氣電子、製造加工機械、安全防護

管理系統認證：ISO 9001

主要產品：造粒機、刨片機、造粒機、造粒機、化學造粒機、Vocs

公司簡介：杭州瑞德森機械有限公司，前身為杭州新特塑膠機械廠，是一家專業生產創新塑膠回收機械的企業。憑藉近20年的經驗，我們在國內20個省市自治區擁有良好的市場，部分產品出口到印尼、俄羅斯、越南等。管材撕碎回收生產線、連續退火鍍錫機、QX型PET、PE及皮殼清洗生產線、SDP雙軌塑膠回收破碎機、SJ熱切造粒機組、PVC管（五葉）生產線、PVC異型材產品門窗生產線、水中顆粒生產線以及塑膠和回收粉碎機。我們獲得了5項技術專利。

本公司注重技術改造，引進國內外先進技術，不斷開發新產品。我們的宗旨是挑戰高品質，提供最好的產品。我們正在努力實現我們的口號。讓客戶滿意是我們永恆的追求。

我們正在尋找海外客戶或代理商。如果您對我們的提案感興趣，請讓我們知道我們的哪種產品最有可能吸引您或您的客戶。如果您能給我們一些關於我們產品的市場前景的想法，我們將不勝感激。我們希望盡快收到您的有利訊息！我們的目標是希望現在或不久的將來能與您建立良好的關係。如果您有任何問題或要求，請隨時與我們聯繫。

我們也真誠歡迎您來本公司洽談業務、洽談業務。為進一步拓展市場與客戶，本公司以全新的經營理念－品質、榮譽、服務，以全新的品牌姿態迎接國內外客戶。我們正在尋找 ISO 90001 管理品質系統來滿足客戶的要求！

Can regenerative thermal oxidizers be used for treating industrial wastewater?

No, regenerative thermal oxidizers (RTOs) are not typically used for treating industrial wastewater. RTOs are specifically designed for air pollution control and the treatment of gaseous pollutants, such as volatile organic compounds (VOCs) and hazardous air pollutants (HAPs).

Here are some key points to consider regarding the use of RTOs for treating industrial wastewater:

• Operating Principle: RTOs rely on the combustion of pollutants in the gas phase. They utilize high temperatures to thermally oxidize gaseous pollutants, converting them into carbon dioxide and water vapor. However, wastewater treatment involves the removal or transformation of contaminants dissolved or suspended in water, which requires different treatment mechanisms.
• Wastewater Treatment Technologies: Wastewater treatment typically involves processes such as physical separation, chemical treatment, biological treatment, and other specialized techniques depending on the nature of the contaminants. Common wastewater treatment technologies include activated sludge systems, sedimentation tanks, chemical precipitation, filtration, and various other methods tailored to specific wastewater characteristics.
• Environmental Regulations: Industrial wastewater treatment is subject to stringent environmental regulations and discharge standards that govern the quality of effluent released into water bodies. Compliance with these regulations requires the implementation of appropriate wastewater treatment technologies specifically designed for the removal or reduction of contaminants in water, rather than air pollution control technologies like RTOs.
• Integration with Wastewater Treatment Systems: While RTOs are not used for wastewater treatment, they may be integrated into overall industrial process systems where wastewater treatment is also required. In such cases, separate wastewater treatment technologies are employed to treat the wastewater, and RTOs are used to address air emissions resulting from the wastewater treatment process or other industrial operations.

In summary, regenerative thermal oxidizers are not suitable for treating industrial wastewater. They are designed for air pollution control and the destruction of gaseous pollutants. For effective wastewater treatment, industries should employ appropriate wastewater treatment technologies specifically designed for the removal or transformation of contaminants in water.

蓄熱式熱氧化器如何處理系統中顆粒物的堆積？

蓄熱式熱氧化器 (RTO) 採用各種機制來處理系統中顆粒物的堆積。灰塵、煙灰或其他固體顆粒等顆粒物會隨著時間的推移而積累，並可能影響 RTO 的性能和效率。以下是 RTO 處理顆粒物堆積的一些方法：

• 預過濾： RTO 可以採用預過濾系統，例如旋風分離器或袋式過濾器，以在較大的顆粒物質進入氧化器之前將其去除。這些預過濾器捕獲並收集顆粒，防止它們進入 RTO 並減少積聚的可能性。
• 自潔效果： RTO 的設計目的是對熱交換介質具有自清潔作用。在 RTO 運作期間，熱廢氣流過介質會導致顆粒燃燒或分解，從而最大限度地減少顆粒的累積。高溫和湍流有助於保持介質表面清潔，並降低大量顆粒堆積的風險。
• 吹掃週期： RTO 通常將吹掃循環作為其操作的一部分。這些循環涉及將少量清潔空氣或氣體引入系統以清除任何殘留的顆粒物質。吹掃空氣有助於去除或燒掉任何黏附在介質上的顆粒，確保介質的持續清潔。
• 定期維護： 定期維護對於防止 RTO 中顆粒物堆積過多至關重要。維護活動可能包括檢查和清潔熱交換介質，檢查和更換任何磨損的墊圈或密封件，以及監控系統是否有任何顆粒積聚的跡象。定期維護有助於確保最佳性能，並最大限度地降低與顆粒物堆積相關的操作問題的風險。
• 監控與警報： RTO 配備了監控系統，可追蹤壓力差、溫度和流量等各種參數。這些系統可以檢測任何可能表明顆粒物堆積的異常情況或過度壓力降。可以觸發警報和警報來通知操作員，提示他們採取適當的行動，例如啟動維護或清潔程序。

值得注意的是，用於處理顆粒物堆積的具體策略可能會根據 RTO 的設計和配置以及所處理的顆粒物的特性而有所不同。 RTO製造商和營運商應考慮這些因素並採取適當的措施，以確保系統中顆粒物的有效管理。

透過結合預過濾、利用自清潔效應、實施吹掃循環、進行定期維護以及採用監控系統，RTO 可以有效處理和減少顆粒物積聚，從而長期保持其性能和效率。

How do regenerative thermal oxidizers handle start-up and shutdown procedures?

Regenerative thermal oxidizers (RTOs) have specific procedures for start-up and shutdown to ensure safe and efficient operation. These procedures are designed to optimize the performance of the RTO and minimize any potential risks. Here is an overview of how RTOs handle start-up and shutdown:

• Start-up Procedure: During start-up, the RTO goes through a series of steps to reach its operating temperature. The start-up procedure typically involves the following stages:
1. Purge Stage: The RTO is purged with clean air or an inert gas to remove any potential flammable or explosive gases that may have accumulated during the shutdown period.
2. Preheat Stage: The RTO’s heat exchangers are preheated using a burner or an auxiliary heat source. This gradually increases the temperature of the heat exchange media (typically ceramic or metallic beds) and the combustion chamber.
3. Heat Soak Stage: Once the heat exchangers reach a certain temperature, the RTO enters the heat soak stage. In this stage, the heat exchangers are fully heated, and the RTO operates in a self-sustaining mode, with the combustion chamber temperature being maintained primarily by the heat released from the oxidation of pollutants in the exhaust gas.
4. Normal Operation: After the heat soak stage, the RTO is considered to be in normal operation mode, where it maintains the desired operating temperature and treats the exhaust gas containing pollutants.
• Shutdown Procedure: The shutdown procedure of an RTO is aimed at safely and efficiently stopping the operation of the system. The procedure typically involves the following steps:
1. Cool Down: The RTO is gradually cooled down by reducing the flow of the exhaust gas and the supply of combustion air. This helps to prevent thermal stress on the equipment and minimize the risk of fires or other safety hazards.
2. 熱回收： During the cool-down phase, the RTO may employ heat recovery techniques to capture and utilize the residual heat for other purposes, such as preheating incoming process air or water.
3. Purge: Once the RTO has cooled down sufficiently, a purge cycle is initiated to remove any residual gases or contaminants from the system. This helps to ensure a clean and safe environment for maintenance activities or subsequent start-ups.
4. Complete Shutdown: After the purge cycle, the RTO is considered to be in a fully shut-down state, and it can remain in this state until the next start-up is initiated.

It is important to note that the specific start-up and shutdown procedures for an RTO may vary depending on the design and manufacturer. Manufacturers typically provide detailed guidelines and instructions for operating their specific RTO models, and it is crucial to follow these guidelines to ensure safe and efficient operation.

editor by CX 2023-10-20