China Best Sales Regenerative/Recuperative Thermal Oxidizer Rto for Voc Treatment

基本訊息

型號

Amazing RTO

類型

Incinerator

Energy Saving

100

Easy for Operation

100

High Efficiency

100

Less Maintenance

100

商標

Bjamazing

運輸套餐

Overseas Wooden

Specification

180*24

起源

China

HS Code

8416100000

產品描述

RTO

蓄熱式熱氧化器

Compared with traditional catalytic combustion,; direct thermal oxidizer,; RTO has the merits of high heating efficiency,; low operation cost,; and the ability to treat large flux low concentration waste gas.; When VOCs concentration is high,; secondary heat recycle can be realized,; which will greatly reduce the operation cost.; Because RTO can preheat the waste gas by levels through ceramic heat accumulator,; which could make the waste gas to be completely heated and cracked with no dead corner(treatment efficiency>99%);,;which reduce the NOX in the Exhausting gas,; if the VOC density >1500mg/Nm3,; when the waste gas reach cracking area,; it has been heated up to cracking temperature by heat accumulator,; the burner will be closed under this condition.;

RTO can be devided into chamber type and rotary type according to difference operation mode.; Rotary type RTO has advantages in system pressure,; temperature stability,; investment amount,; etc

Recuperative thermal oxidizer:;

Compared with the catalytic combustion and regenerative thermal oxidation furnace,; recuperative thermal oxidizer  investment is less .; Recuperative thermal oxidizer system can be designed for the entire incineration system as well as the new air system,; which is more suitable for production characteristics of coating units  for building materials plate.;

Regenerative Thermal Oxidizer,; Regenerative Thermal Oxidizer,; Recuperative Thermal Oxidizer,; recuperative Thermal Oxidizer,; recuperative Thermal Oxidizer,; Thermal Oxidizer,; oxidizer,; oxidizer,; oxidizer,; incinerator,; incinerator,; incinerator,; waste gas treatment,; waste gas treatment,; waste gas treatment,; VOC treatment,; VOC treatment,; VOC treatment,; RTO,; RTO,; RTO,; RTO,; RTO,; RTO

Address: 8 floor, E1, Pinwei building, Dishengxi road, Yizhuang, ZheJiang , China

業務類型: 製造商/工廠, 貿易公司

Business Range: Electrical & Electronics, Industrial Equipment & Components, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy

Management System Certification: ISO 9001, ISO 14001

Main Products: Rto, Color Coating Line, Galvanizing Line, Air Knife, Spares for Processing Line, Coater, Independent Equipments, Sink Roll, Revamping Project, Blower

Company Introduction: ZheJiang Amazing Science & Technology Co., Ltd is a thriving Hi-tech company, located in ZheJiang Economic and Technological Development Area(BDA). Adhering to the concept of Realistic, Innovative, Focused and Efficient, our company mainly serve the waste gas treatment (VOCs) Industry and metallurgical equipment of China and even whole world. We have advanced technology and rich experience in VOCs waste gas treatment project, the reference of which has been successfully applied to the industry of coating, rubber, electronic, printing, etc. We also have years of technology accumulation in the research and manufacturing of flat steel processing line, and possess nearly 100 of application example.

Our company focus on the research, design, manufacturing, installation and commissioning of VOCs organic waste gas treatment system and the revamping and updating project for energy saving and environmental protection of flat steel processing line. We can provide customers the complete solutions for environmental protection, energy saving, product quality improvement and other aspects.

We are also engaged in various spares and independent equipment for color coating line, galvanizing line, pickling line, like roller, coupler, heat exchanger, recuperator, air knife, blower, welder, tension leveler, skin pass, expansion joint, shear, jointer, stitcher, burner, radiant tube, gear motor, reducer, etc.

What are the limitations of regenerative thermal oxidizers?

While regenerative thermal oxidizers (RTOs) are widely used for air pollution control, they do have certain limitations that should be considered. Here are some key limitations of RTOs:

• High Capital Cost: RTOs typically have higher capital costs compared to other air pollution control technologies. The complexity of the regenerative heat exchanger system, which enables high energy efficiency, can contribute to the higher upfront investment required for RTO installation.
• Space Requirements: RTOs generally require a larger footprint compared to some other air pollution control devices. The presence of regenerative heat exchangers, combustion chambers, and associated equipment necessitates adequate space for installation. This can be a limitation for industries with limited available space.
• High Energy Consumption during Startup: RTOs require a certain amount of time and energy to reach their optimal operating temperature during startup. This initial energy consumption can be relatively high, and it is important to consider this aspect when planning the operational schedule and energy management of an RTO system.
• Limitations in Handling Low Concentration VOCs: RTOs may have limitations in effectively treating low concentration volatile organic compounds (VOCs). If the VOC concentrations in the exhaust gas are too low, the energy required to maintain the necessary temperature for oxidation may be higher than the energy released during the combustion process. In such cases, other air pollution control technologies or pre-concentration techniques may be more suitable.
• Particulate Matter Control: RTOs are not specifically designed for controlling particulate matter emissions. While they may provide some incidental removal of fine particulate matter, their removal efficiency for particulates is generally lower compared to dedicated particulate control devices such as fabric filters (baghouses) or electrostatic precipitators.
• Chemically Corrosive Gases: RTOs may not be suitable for treating exhaust gases containing highly corrosive compounds. The high temperatures within the RTO can accelerate corrosion of materials, and the presence of corrosive gases may require additional corrosion-resistant materials or alternative air pollution control technologies.

Despite these limitations, RTOs remain an effective and widely used technology for the destruction of gaseous pollutants in various industrial applications. It is important to evaluate the specific requirements, characteristics of the exhaust gases, and environmental regulations when considering the implementation of an RTO system.

Are regenerative thermal oxidizers suitable for controlling emissions from food processing operations?

Yes, regenerative thermal oxidizers (RTOs) can be suitable for controlling emissions from food processing operations. Food processing operations often generate volatile organic compounds (VOCs) and odorous compounds that need to be controlled to comply with environmental regulations and maintain air quality. Here are some key points regarding the suitability of RTOs for controlling emissions from food processing operations:

• Emission Control: RTOs are designed to achieve high destruction efficiencies for VOCs and odorous compounds. These pollutants are oxidized within the RTO at high temperatures, typically above 95% efficiency, converting them into carbon dioxide (CO₂) and water vapor. This ensures effective control and reduction of emissions from food processing operations.
• Process Compatibility: RTOs can be integrated into the exhaust systems of various food processing operations, capturing and treating the emissions before they are released into the atmosphere. The RTO is typically connected to the process equipment or exhaust stack, allowing the VOC-laden air to pass through the oxidizer for treatment.
• Flexibility: RTOs offer flexibility in handling a wide range of operating conditions and pollutants. Food processing operations can vary in terms of flow rates, temperature, and composition of emissions. RTOs are designed to accommodate these variations and provide effective treatment even under fluctuating conditions.
• Odor Control: In addition to VOCs, food processing operations can also generate odorous compounds, which can cause nuisance and odor-related complaints. RTOs can be equipped with additional odor control technologies such as activated carbon beds or scrubbers to address odor concerns and ensure the removal of unpleasant odors.
• Compliance with Regulations: Food processing operations are subject to regulatory requirements for air quality and emissions control. RTOs are capable of achieving the necessary destruction efficiencies and can help food processors comply with environmental regulations. The use of RTOs demonstrates a commitment to sustainable practices and responsible management of air emissions.

It is important to note that the specific design and configuration of the RTO, as well as the characteristics of the food processing emissions, should be considered when implementing an RTO for a specific application. Consulting with experienced engineers or RTO manufacturers can provide valuable insights into the proper sizing, integration, and performance requirements for controlling emissions from food processing operations.

In summary, RTOs are a suitable and effective technology for controlling emissions from food processing operations, providing high destruction efficiencies, compatibility with various processes, flexibility in handling operating conditions, odor control capabilities, and compliance with environmental regulations.

Can a regenerative thermal oxidizer handle high-volume exhaust gases?

Yes, a regenerative thermal oxidizer (RTO) is capable of handling high-volume exhaust gases emitted from industrial processes. RTOs are designed to handle a wide range of flow rates, including high-volume exhaust streams. Here are the reasons why RTOs are suitable for handling high-volume exhaust gases:

1. Scalability: RTOs are highly scalable and can be designed to accommodate varying exhaust gas volumes. The size and capacity of an RTO can be customized to match the specific requirements of the industrial process. This scalability allows RTOs to handle high-volume exhaust gases effectively.

2. Modular Design: RTOs often feature a modular design that allows multiple units to be installed in parallel. This modular configuration enables the treatment of large exhaust gas volumes by operating multiple RTO units simultaneously. The modular approach provides flexibility and ensures efficient handling of high-volume exhaust gases.

3. Large Heat Exchange Surface: RTOs incorporate structured ceramic media beds that provide a large heat exchange surface area. The media beds efficiently transfer heat between the incoming and outgoing gas streams, facilitating the oxidation of VOCs. The large heat exchange surface area enables RTOs to effectively handle high-volume exhaust gases while maintaining the required combustion temperature.

4. Heat Recovery: RTOs are known for their energy-efficient operation due to their heat recovery capabilities. The heat recovery system within an RTO captures and preheats the incoming process air by utilizing the heat energy from the outgoing exhaust stream. This heat recovery mechanism minimizes the energy consumption required to maintain the combustion temperature, making RTOs well-suited for handling high-volume exhaust gases without significantly increasing energy costs.

5. Effective Flow Distribution: RTOs are engineered to ensure proper flow distribution within the system. The design includes appropriate ductwork, valves, and dampers to evenly distribute the exhaust gases across the ceramic media beds. Effective flow distribution prevents preferential flow paths and ensures that all exhaust gases receive sufficient residence time for complete VOC destruction, even in high-volume exhaust gas applications.

6. Advanced Control Systems: Modern RTOs are equipped with advanced control systems that optimize the performance of the system. These control systems monitor and regulate various parameters, including temperature, airflow, and valve sequencing. The control systems adapt to the fluctuating exhaust gas volumes and maintain the required combustion temperature, ensuring efficient handling of high-volume exhaust gases.

In summary, regenerative thermal oxidizers (RTOs) are capable of effectively handling high-volume exhaust gases. Their scalability, modular design, large heat exchange surface, heat recovery capabilities, effective flow distribution, and advanced control systems make RTOs well-suited for industrial processes that generate substantial exhaust gas volumes.

editor by CX 2024-03-07