China OEM Rto Bed Type/Chamber Type Rto Regenerative Thermal Oxidizer

基本訊息

型號

Amazing RTO

類型

Incinerator

High Efficiency

100

Energy Saving

100

Low Maintenance

100

Easy Operation

100

商標

Bjamazing

運輸套餐

Overseas

Specification

111

起源

China

HS Code

2221111

產品描述

RTO

蓄熱式熱氧化器

Compared with traditional catalytic combustion,; direct thermal oxidizer,; RTO has the merits of high heating efficiency,; low operation cost,; and the ability to treat large flux low concentration waste gas.; When VOCs concentration is high,; secondary heat recycle can be realized,; which will greatly reduce the operation cost.; Because RTO can preheat the waste gas by levels through ceramic heat accumulator,; which could make the waste gas to be completely heated and cracked with no dead corner(treatment efficiency>99%);,;which reduce the NOX in the Exhausting gas,; if the VOC density >1500mg/Nm3,; when the waste gas reach cracking area,; it has been heated up to cracking temperature by heat accumulator,; the burner will be closed under this condition.;

RTO can be devided into chamber type and rotary type according to difference operation mode.; Rotary type RTO has advantages in system pressure,; temperature stability,; investment amount,; etc

Regenerative Thermal Oxidizer,; Regenerative Thermal Oxidizer,; Regenerative Thermal Oxidizer,;  Thermal Oxidizer,; Thermal Oxidizer,; Thermal Oxidizer,; oxidizer,; oxidizer,; oxidizer,; incinerator,; incinerator,; incinerator,; waste gas treatment,; waste gas treatment,; waste gas treatment,; VOC treatment,; VOC treatment,; VOC treatment,; RTO,; RTO,; RTO,; Rotary RTO,; Rotary RTO,; Rotary RTO,; Chamber RTO,; Chamber RTO,; Chamber RTO

Address: 8 floor, E1, Pinwei building, Dishengxi road, Yizhuang, ZheJiang , China

業務類型: 製造商/工廠, 貿易公司

Business Range: Electrical & Electronics, Industrial Equipment & Components, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy

Management System Certification: ISO 9001, ISO 14001

Main Products: Rto, Color Coating Line, Galvanizing Line, Air Knife, Spares for Processing Line, Coater, Independent Equipments, Sink Roll, Revamping Project, Blower

Company Introduction: ZheJiang Amazing Science & Technology Co., Ltd is a thriving Hi-tech company, located in ZheJiang Economic and Technological Development Area(BDA). Adhering to the concept of Realistic, Innovative, Focused and Efficient, our company mainly serve the waste gas treatment (VOCs) Industry and metallurgical equipment of China and even whole world. We have advanced technology and rich experience in VOCs waste gas treatment project, the reference of which has been successfully applied to the industry of coating, rubber, electronic, printing, etc. We also have years of technology accumulation in the research and manufacturing of flat steel processing line, and possess nearly 100 of application example.

Our company focus on the research, design, manufacturing, installation and commissioning of VOCs organic waste gas treatment system and the revamping and updating project for energy saving and environmental protection of flat steel processing line. We can provide customers the complete solutions for environmental protection, energy saving, product quality improvement and other aspects.

We are also engaged in various spares and independent equipment for color coating line, galvanizing line, pickling line, like roller, coupler, heat exchanger, recuperator, air knife, blower, welder, tension leveler, skin pass, expansion joint, shear, jointer, stitcher, burner, radiant tube, gear motor, reducer, etc.

蓄熱式熱氧化器可以處理不同濃度的污染物嗎？

蓄熱式熱氧化器 (RTO) 旨在有效處理變化的污染物濃度。它們能夠適應污染物濃度的波動，而不會對其性能或效率產生重大不利影響。 RTO 處理可變污染物濃度的能力是使其適合廣泛工業應用的優點之一。

以下是關於 RTO 處理可變污染物濃度的能力需要考慮的一些關鍵點：

• 破壞效率高： RTO 以其高破壞效率而聞名，這是指它們有效破壞或氧化廢氣中污染物的能力。 RTO 內的燃燒室旨在保持足夠高的溫度，以確保污染物完全氧化，無論污染物濃度如何。
• 保留時間： RTO 設計為在燃燒室內有足夠的停留或保留時間。這使得廢氣在高溫區停留足夠的時間，確保即使是不同濃度的污染物也能得到充分的處理和氧化。
• 熱回收： RTO 中的熱回收系統通常使用陶瓷介質床或熱交換器，在處理可變污染物濃度方面發揮至關重要的作用。即使在污染物濃度較低的時期，熱回收系統也有助於維持所需的溫度並提供熱能來維持燃燒過程。
• 動態運作： RTO 設計為動態運行，這意味著它們可以調整其運行參數以適應污染物濃度的變化。它們可以調節廢氣和進入的未處理氣體的流量、溫度設定點以及床的切換頻率等變量，以優化不同污染物負荷下的性能。
• 監控與控制： RTO 配備了先進的監測和控制系統，可連續監測污染物濃度、溫度和其他相關參數。這些系統能夠即時調整和優化 RTO 運行，以確保有效處理可變污染物濃度。

雖然 RTO 可以處理可變的污染物濃度，但值得注意的是，極端或高度波動的污染物濃度可能需要額外考慮。在某些情況下，可以採用廢氣稀釋或調節等預處理方法來確保 RTO 的最佳性能。

總體而言，RTO 是一種多功能且可靠的系統，可有效處理可變的污染物濃度，從而提供高效且一致的工業排放處理。

Can regenerative thermal oxidizers handle high-temperature exhaust streams?

Regenerative thermal oxidizers (RTOs) are designed to handle high-temperature exhaust streams efficiently. They are capable of accommodating exhaust gases with elevated temperatures and effectively treating them for pollutant removal. Here are some key points regarding the handling of high-temperature exhaust streams in RTOs:

• Thermal Stability: RTOs are constructed using materials that can withstand high temperatures, typically ranging from 800 to 1,500 degrees Celsius (1,472 to 2,732 degrees Fahrenheit). The combustion chamber, heat exchangers, and other components are designed to maintain their structural integrity and thermal stability under these conditions.
• 熱回收： One of the primary advantages of RTOs is their ability to recover and reuse heat from the high-temperature exhaust streams. The heat exchangers within the RTO capture the thermal energy from the outgoing exhaust gases and transfer it to the incoming process air or gas stream. This heat recovery process improves the overall energy efficiency of the system and reduces the need for additional fuel consumption.
• Effective Combustion: RTOs are equipped with combustion chambers where the high-temperature exhaust gases are directed. In the combustion chamber, the pollutants in the exhaust stream are oxidized at high temperatures, typically above the autoignition temperature of the pollutants. This ensures effective destruction of the pollutants, even in high-temperature environments.
• Heat Exchange: RTOs utilize a regenerative heat exchange system, which allows for the efficient transfer of heat between the incoming and outgoing gas streams. The heat exchange media within the RTO alternately absorbs and releases heat, enabling the preheating of the incoming gases and cooling of the outgoing gases. This heat exchange process helps maintain the desired operating temperatures within the RTO while maximizing energy recovery.
• System Design Considerations: When handling high-temperature exhaust streams, proper system design is crucial. Factors such as the choice of materials, insulation, and thermal expansion considerations are taken into account to ensure safe and efficient operation at elevated temperatures. Additionally, temperature monitoring and control systems are implemented to maintain optimal operating conditions.

It is important to note that the specific temperature limits and capabilities of an RTO may vary depending on the design, materials used, and the specific requirements of the application. Consulting with experienced engineers or RTO manufacturers can provide valuable insights into the suitability of an RTO for handling a particular high-temperature exhaust stream.

Overall, RTOs are well-suited for handling high-temperature exhaust streams, offering effective pollutant destruction, heat recovery, and energy efficiency in industrial applications.

哪些行業常用蓄熱式熱氧化器？

蓄熱式熱氧化器 (RTO) 廣泛應用於產生揮發性有機化合物 (VOC)、有害空氣污染物 (HAP) 和其他有害排放物的各個產業。通常使用 RTO 進行空氣污染控制的一些行業包括：

• 化學品製造：RTO 廣泛應用於生產溶劑、油漆、塗料、黏合劑和其他化學產品的化學製造過程。這些行業經常產生大量的揮發性有機化合物，需要有效的控制和減排。
• 印刷和包裝：印刷和包裝行業利用 RTO 來控製油墨乾燥、塗佈和溶劑型製程中的 VOC 和 HAP 排放。 RTO 確保遵守環境法規，同時保持高品質的列印標準。
• 藥品：藥品製造過程通常涉及溶劑和有機化合物的使用，導致揮發性有機化合物的產生。 RTO 為捕捉和銷毀這些排放物提供了有效的解決方案，確保安全、環保的生產環境。
• 油漆和塗料：RTO 通常用於油漆和塗料生產設施，以控制固化和乾燥過程中的 VOC 排放。透過有效破壞 VOC，RTO 有助於減少這些產業對環境的影響，同時維持產品品質。
• 家具和木工：家具和木工行業利用 RTO 來控制噴漆、染色和清漆等工藝的排放。 RTO 有助於去除這些操作過程中產生的 VOC 和 HAP，促進更健康的工作環境並減少對周圍社區的影響。
• 食品加工：某些食品加工作業會產生揮發性有機化合物和有氣味的化合物。 RTO 在這些行業中用於捕獲和處理烹飪、烘焙、油炸和其他食品相關過程中的排放。 RTO 確保符合空氣品質標準，同時最大限度地減少對食品品質和安全的影響。
• 化學品儲存和處理：涉及化學品儲存和處理的設施，例如散裝液體終端和化學品配送中心，可以利用 RTO 來控制排放和蒸氣回收系統的排放。 RTO 有助於減少各種儲存和轉移作業過程中 VOC 和 HAP 的釋放。

這些只是幾個例子，RTO 可以在許多其他產生 VOC 和 HAP 的行業中找到。 RTO 為空氣污染控制提供了多功能且有效的解決方案，確保遵守環境法規並促進永續的工業實踐。

editor by Dream 2024-05-09