China Good quality Rto Bed Type/Chamber Type Rto Regenerative Thermal Oxidizer

基本訊息

型號

Amazing RTO

類型

Incinerator

High Efficiency

100

Energy Saving

100

Low Maintenance

100

Easy Operation

100

商標

Bjamazing

運輸套餐

Overseas

Specification

111

起源

China

HS Code

2221111

產品描述

RTO

蓄熱式熱氧化器

Compared with traditional catalytic combustion,; direct thermal oxidizer,; RTO has the merits of high heating efficiency,; low operation cost,; and the ability to treat large flux low concentration waste gas.; When VOCs concentration is high,; secondary heat recycle can be realized,; which will greatly reduce the operation cost.; Because RTO can preheat the waste gas by levels through ceramic heat accumulator,; which could make the waste gas to be completely heated and cracked with no dead corner(treatment efficiency>99%);,;which reduce the NOX in the Exhausting gas,; if the VOC density >1500mg/Nm3,; when the waste gas reach cracking area,; it has been heated up to cracking temperature by heat accumulator,; the burner will be closed under this condition.;

RTO can be devided into chamber type and rotary type according to difference operation mode.; Rotary type RTO has advantages in system pressure,; temperature stability,; investment amount,; etc

Regenerative Thermal Oxidizer,; Regenerative Thermal Oxidizer,; Regenerative Thermal Oxidizer,;  Thermal Oxidizer,; Thermal Oxidizer,; Thermal Oxidizer,; oxidizer,; oxidizer,; oxidizer,; incinerator,; incinerator,; incinerator,; waste gas treatment,; waste gas treatment,; waste gas treatment,; VOC treatment,; VOC treatment,; VOC treatment,; RTO,; RTO,; RTO,; Rotary RTO,; Rotary RTO,; Rotary RTO,; Chamber RTO,; Chamber RTO,; Chamber RTO

Address: 8 floor, E1, Pinwei building, Dishengxi road, Yizhuang, ZheJiang , China

業務類型: 製造商/工廠, 貿易公司

Business Range: Electrical & Electronics, Industrial Equipment & Components, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy

Management System Certification: ISO 9001, ISO 14001

Main Products: Rto, Color Coating Line, Galvanizing Line, Air Knife, Spares for Processing Line, Coater, Independent Equipments, Sink Roll, Revamping Project, Blower

Company Introduction: ZheJiang Amazing Science & Technology Co., Ltd is a thriving Hi-tech company, located in ZheJiang Economic and Technological Development Area(BDA). Adhering to the concept of Realistic, Innovative, Focused and Efficient, our company mainly serve the waste gas treatment (VOCs) Industry and metallurgical equipment of China and even whole world. We have advanced technology and rich experience in VOCs waste gas treatment project, the reference of which has been successfully applied to the industry of coating, rubber, electronic, printing, etc. We also have years of technology accumulation in the research and manufacturing of flat steel processing line, and possess nearly 100 of application example.

Our company focus on the research, design, manufacturing, installation and commissioning of VOCs organic waste gas treatment system and the revamping and updating project for energy saving and environmental protection of flat steel processing line. We can provide customers the complete solutions for environmental protection, energy saving, product quality improvement and other aspects.

We are also engaged in various spares and independent equipment for color coating line, galvanizing line, pickling line, like roller, coupler, heat exchanger, recuperator, air knife, blower, welder, tension leveler, skin pass, expansion joint, shear, jointer, stitcher, burner, radiant tube, gear motor, reducer, etc.

蓄熱式熱氧化器與催化氧化器相比如何？

蓄熱式熱氧化器 (RTO) 和催化氧化器都是用來控制工業製程空氣排放的有效技術。雖然它們的用途相似，但在操作、效率和適用性方面存在顯著差異。

以下是 RTO 和催化氧化劑之間的比較：

在 RTO 和催化氧化器之間進行選擇時，必須考慮應用的特定要求，包括污染物濃度、流速、溫度要求和成本考量。諮詢環境工程專業人士或設備製造商可以協助確定最適合特定排放控制需求的技術。

Are regenerative thermal oxidizers safe to operate?

Regenerative thermal oxidizers (RTOs) are designed with safety considerations to ensure their safe operation. When properly installed, operated, and maintained, RTOs provide a high level of safety. Here are some key points regarding the safety of operating RTOs:

• Combustion and Fire Safety: RTOs are designed to safely combust and destroy volatile organic compounds (VOCs) and other pollutants in the exhaust stream. They incorporate various safety features to prevent the risk of uncontrolled fires or explosions. These features may include flame arrestors, temperature sensors, pressure relief devices, and automated shutdown systems to ensure safe operation in the event of abnormal operating conditions.
• Control and Monitoring Systems: RTOs are equipped with advanced control and monitoring systems that continuously monitor various parameters such as temperature, pressure, and flow rates. These systems provide real-time data to operators, allowing them to detect any deviations from normal operating conditions promptly. Alarms and safety interlocks are often included to alert operators and initiate appropriate actions in case of abnormal situations.
• Heat Recovery and Thermal Efficiency: RTOs are designed to maximize thermal efficiency by recovering and reusing heat generated during the oxidization process. This reduces the overall energy consumption and minimizes the risk of heat buildup within the system, contributing to safe operation and preventing excessive temperatures that could pose safety hazards.
• Equipment and Material Selection: RTOs are constructed using materials that can withstand the high temperatures and corrosive conditions encountered during operation. Heat-resistant materials, such as ceramic beds or metallic heat exchangers, are commonly used. Proper material selection ensures the integrity and longevity of the equipment, reducing the risk of failures or leaks that could compromise safety.
• Compliance with Standards and Regulations: RTOs must comply with applicable safety standards and regulations. These standards define specific requirements for the design, installation, operation, and maintenance of air pollution control systems, including RTOs. Compliance with these standards ensures that the RTOs meet the necessary safety criteria and helps safeguard the health and well-being of personnel and the surrounding environment.
• Operator Training and Maintenance: Adequate operator training and regular maintenance are crucial for safe RTO operation. Operators should receive comprehensive training on the system’s operation, safety procedures, and emergency response protocols. Additionally, routine maintenance and inspections help identify and address any potential safety concerns or equipment issues before they escalate.

While RTOs are generally safe to operate, it is essential to follow the manufacturer’s guidelines, maintain proper safety protocols, and adhere to applicable regulations to ensure safe and reliable operation.

哪些行業常用蓄熱式熱氧化器？

蓄熱式熱氧化器 (RTO) 廣泛應用於產生揮發性有機化合物 (VOC)、有害空氣污染物 (HAP) 和其他有害排放物的各個產業。通常使用 RTO 進行空氣污染控制的一些行業包括：

• 化學品製造：RTO 廣泛應用於生產溶劑、油漆、塗料、黏合劑和其他化學產品的化學製造過程。這些行業經常產生大量的揮發性有機化合物，需要有效的控制和減排。
• 印刷和包裝：印刷和包裝行業利用 RTO 來控製油墨乾燥、塗佈和溶劑型製程中的 VOC 和 HAP 排放。 RTO 確保遵守環境法規，同時保持高品質的列印標準。
• 藥品：藥品製造過程通常涉及溶劑和有機化合物的使用，導致揮發性有機化合物的產生。 RTO 為捕捉和銷毀這些排放物提供了有效的解決方案，確保安全、環保的生產環境。
• 油漆和塗料：RTO 通常用於油漆和塗料生產設施，以控制固化和乾燥過程中的 VOC 排放。透過有效破壞 VOC，RTO 有助於減少這些產業對環境的影響，同時維持產品品質。
• 家具和木工：家具和木工行業利用 RTO 來控制噴漆、染色和清漆等工藝的排放。 RTO 有助於去除這些操作過程中產生的 VOC 和 HAP，促進更健康的工作環境並減少對周圍社區的影響。
• 食品加工：某些食品加工作業會產生揮發性有機化合物和有氣味的化合物。 RTO 在這些行業中用於捕獲和處理烹飪、烘焙、油炸和其他食品相關過程中的排放。 RTO 確保符合空氣品質標準，同時最大限度地減少對食品品質和安全的影響。
• 化學品儲存和處理：涉及化學品儲存和處理的設施，例如散裝液體終端和化學品配送中心，可以利用 RTO 來控制排放和蒸氣回收系統的排放。 RTO 有助於減少各種儲存和轉移作業過程中 VOC 和 HAP 的釋放。

這些只是幾個例子，RTO 可以在許多其他產生 VOC 和 HAP 的行業中找到。 RTO 為空氣污染控制提供了多功能且有效的解決方案，確保遵守環境法規並促進永續的工業實踐。

editor by CX 2024-04-13