China manufacturer Rto/Regenerative Thermal Oxidizer

Základní informace.

Model NO.

Úžasné RTO

Typ

Spalovna

Vysoká účinnost

100

Úspora energie

100

Low Maintenance

100

Easy Operation

100

Ochranná známka

Bjamazing

Přepravní balíček

Overseas

Specifikace

111

Původ

Čína

Kód HS

2221111

Popis produktu

RTO

Regenerační tepelný oxidátor

V porovnání s tradičním katalytickým spalováním; přímé tepelné okysličovadlo,; RTO má přednost ve vysoké účinnosti vytápění; nízké provozní náklady; a schopnost zpracovávat odpadní plyn s nízkou koncentrací velkého toku; Když je koncentrace VOC vysoká,; lze realizovat sekundární recyklaci tepla,; což výrazně sníží provozní náklady.; Vzhledem k tomu, že RTO může předehřívat odpadní plyn o úrovně prostřednictvím keramického akumulátoru tepla,; což by mohlo způsobit, že se odpadní plyn úplně zahřeje a popraská bez mrtvého rohu (účinnost čištění > 99 %);,;které snižují NOX ve výfukových plynech;; pokud je hustota VOC > 1500 mg/Nm3; když odpadní plyn dosáhne oblasti praskání; byla zahřátá na teplotu praskání pomocí tepelného akumulátoru; hořák bude za těchto podmínek uzavřen.;

RTO lze rozdělit na typ komory a rotační typ podle rozdílu provozního režimu.; Rotační typ RTO má výhody v systémovém tlaku,; teplotní stabilita; výše investice,; atd

Regenerative Thermal Oxidizer,; Regenerative Thermal Oxidizer,; Regenerative Thermal Oxidizer,;  Thermal Oxidizer,; Thermal Oxidizer,; Thermal Oxidizer,; oxidizer,; oxidizer,; oxidizer,; incinerator,; incinerator,; incinerator,; waste gas treatment,; waste gas treatment,; waste gas treatment,; VOC treatment,; VOC treatment,; VOC treatment,; RTO,; RTO,; RTO,; Rotary RTO,; Rotary RTO,; Rotary RTO,; Chamber RTO,; Chamber RTO,; Chamber RTO

Adresa: 8 patro, E1, budova Pinwei, Dishengxi road, Yizhuang, ZheJiang, Čína

Typ podnikání: Výrobce/Továrna, Obchodní společnost

Rozsah podnikání: Elektrika a elektronika, Průmyslová zařízení a komponenty, Stroje na výrobu a zpracování, Metalurgie, Nerosty a energie

Certifikace systému managementu: ISO 9001, ISO 14001

Hlavní produkty: Rto, barevná lakovací linka, galvanizační linka, vzduchový nůž, náhradní díly pro zpracovatelskou linku, nanášecí stroj, nezávislá zařízení, dřezový válec, projekt renovace, dmychadlo

Představení společnosti: ZheJiang Amazing Science & Technology Co., Ltd je prosperující hi-tech společnost se sídlem v oblasti hospodářského a technologického rozvoje ZheJiang (BDA). V souladu s konceptem realistického, inovativního, zaměřeného a efektivního naše společnost slouží především průmyslu zpracování odpadních plynů (VOC) a metalurgickým zařízením Číny a dokonce i celého světa. Máme pokročilou technologii a bohaté zkušenosti s projektem zpracování odpadních plynů VOCs, jehož reference byla úspěšně aplikována v průmyslu nátěrových hmot, pryže, elektroniky, polygrafie atd. Máme také roky technologické akumulace ve výzkumu a výrobě plochých linka na zpracování oceli a má téměř 100 příkladů použití.

Naše společnost se zaměřuje na výzkum, návrh, výrobu, instalaci a zprovoznění systému čištění organických odpadních plynů VOCs a projekt modernizace a aktualizace pro úsporu energie a ochranu životního prostředí linky na zpracování ploché oceli. Můžeme zákazníkům poskytnout kompletní řešení pro ochranu životního prostředí, úsporu energie, zlepšování kvality produktů a další aspekty.

Zabýváme se také různými náhradními díly a nezávislými zařízeními pro barevnou lakovací linku, galvanizační linku, mořicí linku, jako je válec, spojka, tepelný výměník, rekuperátor, vzduchový nůž, dmychadlo, svářečka, vyrovnávač napětí, skin pass, dilatační spára, smyk, spárovačka , sešívačka, hořák, sálavá trubice, převodový motor, reduktor atd.

Are regenerative thermal oxidizers noisy during operation?

Regenerative thermal oxidizers (RTOs) can generate noise during operation, but the noise levels are typically within acceptable limits and can be managed effectively. The noise produced by an RTO depends on various factors, including the specific design of the system, the size and type of fans or blowers used, and the velocity and pressure of the exhaust gases.

Here are some considerations regarding the noise produced by RTOs:

• Noise Control Measures: RTO manufacturers often incorporate noise control measures into the design of the system. These measures may include the use of silencers or sound-absorbing materials at strategic locations within the RTO to minimize noise propagation. By implementing these measures, the noise generated by the RTO can be reduced to acceptable levels.
• Location and Distance: The location of the RTO within the facility can impact the perceived noise levels. Placing the RTO in an area away from sensitive receptors, such as occupied spaces or noise-sensitive equipment, can help minimize the impact of noise on the facility’s occupants or neighboring properties.
• Enclosures and Insulation: Additional noise reduction can be achieved by enclosing the RTO in a soundproof housing or using insulation materials to dampen the noise. These enclosures or insulation can help contain and absorb the noise generated by the RTO, reducing its impact on the surrounding environment.
• Operational Considerations: Proper maintenance and regular inspections of the RTO are essential to ensure optimal performance and minimize noise generation. Malfunctioning components, worn-out bearings, or imbalanced fans can contribute to increased noise levels. By conducting routine maintenance and addressing any issues promptly, the noise levels can be kept under control.
• Regulatory Compliance: Noise regulations and guidelines may vary depending on the jurisdiction and the specific industrial sector. It is important to assess and comply with applicable noise regulations to ensure that the RTO’s operation meets the required noise limits.

Overall, while RTOs can produce noise during operation, appropriate design considerations, noise control measures, and compliance with applicable regulations can help mitigate the impact of the noise. Consulting with RTO manufacturers, acoustical engineers, or environmental consultants can provide valuable insights and recommendations for managing noise associated with RTO operation.

What are the startup and shutdown time requirements for a regenerative thermal oxidizer?

The startup and shutdown time requirements for a regenerative thermal oxidizer (RTO) can vary depending on several factors, including the specific design of the RTO, the size of the system, and the operating conditions. Here are some key points regarding the startup and shutdown time requirements for an RTO:

• Startup Time: The startup time for an RTO typically refers to the time it takes for the system to reach its operating temperature and stabilize for effective emission control. The startup time can range from several hours to several days, depending on the size of the RTO, the thermal capacity of the heat exchange media, and the desired operating temperature. During startup, the RTO gradually heats up the heat exchange beds or media using a burner system or other heating mechanisms until the desired temperature is reached.
• Shutdown Time: The shutdown time for an RTO refers to the time it takes to safely cool down the system and bring it to a complete stop. The shutdown time can also vary and may range from several hours to several days. During shutdown, the flow of exhaust gas is stopped, and the RTO initiates a cooling process to lower the temperature of the heat exchange media. Cooling mechanisms such as air or water may be used to expedite the cooling process and ensure safe operation.
• System Requirements: The specific startup and shutdown time requirements for an RTO are often determined by the process requirements, operational needs, and regulatory compliance. Some applications may require faster startup and shutdown times to accommodate frequent process changes, while others may prioritize energy efficiency and opt for longer startup and shutdown times to allow for heat recovery and minimize fuel consumption.
• Control Systems: Advanced control systems are typically employed to monitor and control the startup and shutdown processes of an RTO. These systems ensure that the temperature ramp-up and ramp-down rates are within safe limits and that the system operates efficiently and reliably during these phases.

It is essential to consult with RTO manufacturers or experienced engineers to determine the specific startup and shutdown time requirements for a particular RTO based on its design, size, and intended application. They can provide guidance on optimizing the startup and shutdown processes to meet the operational and regulatory needs while ensuring the safe and efficient operation of the RTO.

In summary, the startup and shutdown time requirements for an RTO can vary depending on factors such as system design, size, and operational considerations. Startup times can range from hours to days, while shutdown times can also vary. These requirements are tailored to meet the specific needs of the process and ensure effective emission control while maintaining operational safety.

Are regenerative thermal oxidizers environmentally friendly?

Regenerative thermal oxidizers (RTOs) are considered environmentally friendly air pollution control devices due to several reasons:

• High Efficiency in Pollutant Destruction: RTOs are highly efficient in destroying pollutants, including volatile organic compounds (VOCs) and hazardous air pollutants (HAPs). They typically achieve destruction efficiencies exceeding 99%. This means that the vast majority of harmful pollutants are converted into harmless byproducts, such as carbon dioxide and water vapor.
• Compliance with Emission Regulations: RTOs help industries comply with stringent air quality regulations and emission limits set by environmental agencies. By effectively removing pollutants from industrial exhaust streams, RTOs help reduce the release of harmful substances into the atmosphere, contributing to improved air quality.
• Minimal Secondary Pollutant Formation: RTOs minimize the formation of secondary pollutants. The high temperatures within the combustion chamber promote the complete oxidation of pollutants, preventing the formation of uncontrolled byproducts, such as dioxins and furans, which can be more harmful than the original pollutants.
• Energetická účinnost: RTOs incorporate heat recovery systems that improve energy efficiency. They capture and utilize the heat generated during the oxidation process to preheat the incoming process air, reducing the energy requirements for heating. This energy recovery feature helps minimize the overall environmental impact of the system.
• Reduction of Greenhouse Gas Emissions: By effectively destroying VOCs and HAPs, RTOs contribute to the reduction of greenhouse gas emissions. VOCs are significant contributors to the formation of ground-level ozone and are associated with climate change. By eliminating VOC emissions, RTOs help mitigate the environmental impact associated with these pollutants.
• Applicability to Various Industries: RTOs are widely applicable across different industries and processes. They can handle a wide range of exhaust volumes, pollutant concentrations, and variations in gas composition, making them versatile and adaptable to various industrial applications.

While RTOs offer significant environmental benefits, it’s important to note that their overall environmental performance depends on proper design, operation, and maintenance. Regular inspections, maintenance, and adherence to manufacturer’s guidelines are crucial to ensuring the continued effectiveness and environmental friendliness of RTOs.

editor by CX 2024-03-09