China’s Best Regenerative Thermal Oxidizer: VL2500 Small Air Compressor and Product Description

Product Description

The VL2500 Small Air Compressor is a high-quality, efficient system designed for cleaning process air using thermal oxidation. Complying with both federal and state laws and regulations, it utilizes EPA test methods to ensure optimal performance. The main purpose of the VL2500 is to destroy volatile organic compounds (VOCs) present in the air exhausted from the dryer. This is achieved through thermal oxidation, a chemical process that converts VOCs into CO2 and H2O at high temperatures.

Some examples of VOCs include ethanol (CH3-CH2-OH), acetic acid (CH3-COOH), and carbon monoxide (CO). The VL2500 effectively combines VOCs, oxygen, and heat to produce carbon dioxide and water as byproducts.

With its plug-and-play design, the VL2500 is set for waste gas incineration, making installation and operation quick and easy. The basic overview of the system involves air being ducted to the VL2500, heated to a temperature of 1650ºF (900ºC), and then the heat is distributed back into the system, resulting in clean air exhaust.

Our Advantages

– Lower fuel requirements due to high energy recovery (TE)
– High operating temperature for VOC destruction efficiency (DRE)
– Ease of operation
– Low maintenance

Features

The VL2500 Small Air Compressor is designed with modularized components, allowing for pre-assembly and commissioning in the factory. This minimizes installation time and on-site rework. Additionally, the system occupies minimal space, thanks to its standardized packing and transportation process. It can be easily dismantled and relocated, reducing material loss and stacked parts on-site. The VL2500 can operate in parallel with on-site civil construction and simplifies on-site installation, mitigating the impact of extreme weather conditions.

Layout of the RTOs

(Image of the layout can be found here: Layout of the RTOs

Certificates

(Certificate information)

Installations

(Installation references)

Specifications

RTO-VL2500 specifications:
– Weight: 44 tons
– VOCs removal efficiency: ≥ 99%
– Air volume: 20,000-25,000 Nm3/h
– Burner capacity: 660 kW
– Natural gas requirement: 350 mbar, 66 Nm3/h
– RTO fan power: 75 kW
– Equipment size: 10,050 mm (L) × 7,600 mm (W) × 7,860 mm (H)

(Additional specifications if applicable)

Frequently Asked Questions

1. How does the VL2500 Small Air Compressor achieve VOC destruction?

The VL2500 utilizes thermal oxidation, a chemical process that converts volatile organic compounds into carbon dioxide and water at high temperatures.

2. What are some examples of volatile organic compounds (VOCs)?

Examples of VOCs include ethanol (CH3-CH2-OH), acetic acid (CH3-COOH), and carbon monoxide (CO).

3. What are the advantages of the VL2500 Small Air Compressor?

The VL2500 offers lower fuel requirements, high operating temperature for VOC destruction efficiency, ease of operation, and low maintenance.

4. Can the VL2500 be easily relocated?

Yes, the VL2500 is designed for ease of relocation, minimizing material loss and on-site rework.

5. What are the specifications of the RTO-VL2500?

The RTO-VL2500 has a weight of 44 tons, VOCs removal efficiency of ≥ 99%, air volume of 20,000-25,000 Nm3/h, burner capacity of 660 kW, natural gas requirement of 350 mbar, 66 Nm3/h, RTO fan power of 75 kW, and equipment size of 10,050 mm (L) × 7,600 mm (W) × 7,860 mm (H).

Other Products and Businesses

Our company specializes in supplying various industrial products, including agricultural gearboxes, power output shafts, sprockets, hydraulic couplings, worm gear reducers, racks, roller chains, pulleys, planetary gearboxes, timing pulleys, and bushings. We pride ourselves on offering high-quality products, competitive prices, and exceptional customer service. Customization services are available based on drawings and samples.

Regenerative Thermal Oxidizer: Performance Characteristics and Types

Regenerative Thermal Oxidizer (RTO) is a type of industrial air pollution control system that is designed to remove hazardous gases and particulate matter from industrial exhaust streams. RTOs are highly efficient, cost-effective, reliable, and environmentally friendly. The performance characteristics of RTO can be summarized as follows:

  • High Destruction Efficiency: RTOs can achieve up to 99% destruction efficiency for volatile organic compounds, hazardous air pollutants, and other air pollutants.
  • Low Operating Cost: RTOs use a regenerative process to operate, which means that the heat generated during the combustion process is recycled and used to preheat the incoming exhaust gas stream. This results in low operating cost and high energy efficiency.
  • Flexible Operation: RTOs can operate over a wide range of gas flow rates and pollutant concentrations, making them suitable for various industrial applications.
  • Minimal Maintenance: RTOs are designed for long-term operation with minimal maintenance requirements. They have no moving parts and require only periodic cleaning and inspection.

There are different types of RTOs, including three-bed RTOs, two-bed RTOs, and single-bed RTOs. The types of RTOs are classified based on the number of beds, flow control mechanisms, and heat recovery systems. The characteristics of each type of RTO are as follows:

  • Three-Bed RTO: This type of RTO has three beds of ceramic heat exchange media. It provides the highest level of heat recovery and energy efficiency. Three-bed RTOs are ideal for applications with high gas flow rates and low pollutant concentrations.
  • Two-Bed RTO: This type of RTO uses two beds of ceramic heat exchange media. It is more compact than three-bed RTOs and requires less space. Two-bed RTOs are suitable for applications with moderate gas flow rates and pollutant concentrations.
  • Single-Bed RTO: This type of RTO has only one bed of ceramic heat exchange media. It is the simplest and most economical type of RTO. Single-bed RTOs are suitable for applications with low gas flow rates and high pollutant concentrations.

Advantages of Regenerative Thermal Oxidizer Made of Different Materials

The materials used to construct RTOs are an important factor in their performance and longevity. The advantages of RTOs made of different materials are as follows:

  • Ceramic RTOs: Ceramic RTOs are the most commonly used type of RTO. They are durable, resistant to thermal shock, and can withstand high temperatures. Ceramic RTOs have a long lifespan and require minimal maintenance.
  • Carbon Steel RTOs: Carbon steel RTOs are cost-effective and suitable for low to moderate temperature applications. They are prone to corrosion and require regular maintenance.
  • Stainless Steel RTOs: Stainless steel RTOs are highly resistant to corrosion and can withstand high temperatures. They are more expensive than carbon steel RTOs but have a longer lifespan and require less maintenance.
  • Composite RTOs: Composite RTOs are made of a combination of materials, such as ceramic and metal. They offer a balance between durability, cost-effectiveness, and thermal efficiency.

RTO Whole Plant Solution

Future Development Trends and Opportunities of Regenerative Thermal Oxidizer

The demand for RTOs is expected to increase in the coming years due to the growing concern for environmental protection and the implementation of strict emission regulations. The future development trends and opportunities of RTOs can be summarized as follows:

  • Innovative Designs: Manufacturers are developing innovative designs to improve RTO performance and efficiency, such as the use of heat exchangers, regenerative catalysts, and variable frequency drives.
  • Integration with Other Technologies: RTOs can be integrated with other technologies, such as thermal oxidizers and catalytic oxidizers, to provide a more comprehensive air pollution control solution.
  • Expansion into Emerging Markets: The demand for RTOs is growing in emerging markets, such as Asia-Pacific and Latin America, due to the increasing industrialization and urbanization in these regions.

How to Choose a Suitable Regenerative Thermal Oxidizer

Choosing a suitable RTO requires careful consideration of several factors, including emissions characteristics, energy efficiency and heat recovery, regulatory compliance, operational and maintenance considerations, and system size and cost considerations.

  • Emissions Characteristics: The RTO should be designed to handle the specific type and concentration of pollutants emitted by the industrial process.
  • Energy Efficiency and Heat Recovery: The RTO should be designed to maximize energy efficiency and heat recovery to minimize operating costs.
  • Regulatory Compliance: The RTO should comply with local and federal air pollution control regulations and standards.
  • Operational and Maintenance Considerations: The RTO should be easy to operate and maintain, with minimal downtime and maintenance requirements.
  • System Size and Cost Considerations: The RTO should be sized appropriately for the industrial process and should be cost-effective in terms of capital and operating costs.

خاتمة

In summary, Regenerative Thermal Oxidizer is a highly efficient and cost-effective air pollution control system that is widely used in various industrial applications. The performance characteristics and types of RTO were discussed, along with the advantages of RTOs made of different materials. The future development trends and opportunities of RTOs were analyzed, and the factors to consider when choosing a suitable RTO were outlined. By selecting the appropriate RTO, industrial processes can minimize their environmental impact and comply with air pollution control regulations.

Author: Dream

All the content of the page is from the Internet, the content is only as a reference for product selection, our products are replacement parts and not original spare parts; we are not the holder of the original trademarks of the content, our products are only suitable for after-sales replacement parts and not original spare parts, our replacement parts can be perfectly adapted to the original spare parts; if you need to buy original spare parts, please contact the original factory to buy. If you want to buy original spare parts, please contact the original supplier for purchase.

arAR