China Good quality Rto Bed Type/Chamber Type Rto Regenerative Thermal Oxidizer

Basic Info.

Model NO.

Amazing RTO

Type

Incinerator

High Efficiency

100

Energy Saving

100

Low Maintenance

100

Easy Operation

100

Trademark

Bjamazing

Transport Package

Overseas

Specification

111

Origin

China

HS Code

2221111

Product Description

RTO

Regeneratieve thermische oxidator

Compared with traditional catalytic combustion,; direct thermal oxidizer,; RTO has the merits of high heating efficiency,; low operation cost,; and the ability to treat large flux low concentration waste gas.; When VOCs concentration is high,; secondary heat recycle can be realized,; which will greatly reduce the operation cost.; Because RTO can preheat the waste gas by levels through ceramic heat accumulator,; which could make the waste gas to be completely heated and cracked with no dead corner(treatment efficiency>99%);,;which reduce the NOX in the Exhausting gas,; if the VOC density >1500mg/Nm3,; when the waste gas reach cracking area,; it has been heated up to cracking temperature by heat accumulator,; the burner will be closed under this condition.;

RTO can be devided into chamber type and rotary type according to difference operation mode.; Rotary type RTO has advantages in system pressure,; temperature stability,; investment amount,; etc

Regenerative Thermal Oxidizer,; Regenerative Thermal Oxidizer,; Regenerative Thermal Oxidizer,;  Thermal Oxidizer,; Thermal Oxidizer,; Thermal Oxidizer,; oxidizer,; oxidizer,; oxidizer,; incinerator,; incinerator,; incinerator,; waste gas treatment,; waste gas treatment,; waste gas treatment,; VOC treatment,; VOC treatment,; VOC treatment,; RTO,; RTO,; RTO,; Rotary RTO,; Rotary RTO,; Rotary RTO,; Chamber RTO,; Chamber RTO,; Chamber RTO

Address: 8 floor, E1, Pinwei building, Dishengxi road, Yizhuang, ZheJiang , China

Business Type: Manufacturer/Factory, Trading Company

Business Range: Electrical & Electronics, Industrial Equipment & Components, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy

Management System Certification: ISO 9001, ISO 14001

Main Products: Rto, Color Coating Line, Galvanizing Line, Air Knife, Spares for Processing Line, Coater, Independent Equipments, Sink Roll, Revamping Project, Blower

Company Introduction: ZheJiang Amazing Science & Technology Co., Ltd is a thriving Hi-tech company, located in ZheJiang Economic and Technological Development Area(BDA). Adhering to the concept of Realistic, Innovative, Focused and Efficient, our company mainly serve the waste gas treatment (VOCs) Industry and metallurgical equipment of China and even whole world. We have advanced technology and rich experience in VOCs waste gas treatment project, the reference of which has been successfully applied to the industry of coating, rubber, electronic, printing, etc. We also have years of technology accumulation in the research and manufacturing of flat steel processing line, and possess nearly 100 of application example.

Our company focus on the research, design, manufacturing, installation and commissioning of VOCs organic waste gas treatment system and the revamping and updating project for energy saving and environmental protection of flat steel processing line. We can provide customers the complete solutions for environmental protection, energy saving, product quality improvement and other aspects.

We are also engaged in various spares and independent equipment for color coating line, galvanizing line, pickling line, like roller, coupler, heat exchanger, recuperator, air knife, blower, welder, tension leveler, skin pass, expansion joint, shear, jointer, stitcher, burner, radiant tube, gear motor, reducer, etc.

Are regenerative thermal oxidizers noisy during operation?

Regenerative thermal oxidizers (RTOs) can generate noise during operation, but the noise levels are typically within acceptable limits and can be managed effectively. The noise produced by an RTO depends on various factors, including the specific design of the system, the size and type of fans or blowers used, and the velocity and pressure of the exhaust gases.

Here are some considerations regarding the noise produced by RTOs:

• Noise Control Measures: RTO manufacturers often incorporate noise control measures into the design of the system. These measures may include the use of silencers or sound-absorbing materials at strategic locations within the RTO to minimize noise propagation. By implementing these measures, the noise generated by the RTO can be reduced to acceptable levels.
• Location and Distance: The location of the RTO within the facility can impact the perceived noise levels. Placing the RTO in an area away from sensitive receptors, such as occupied spaces or noise-sensitive equipment, can help minimize the impact of noise on the facility’s occupants or neighboring properties.
• Enclosures and Insulation: Additional noise reduction can be achieved by enclosing the RTO in a soundproof housing or using insulation materials to dampen the noise. These enclosures or insulation can help contain and absorb the noise generated by the RTO, reducing its impact on the surrounding environment.
• Operational Considerations: Proper maintenance and regular inspections of the RTO are essential to ensure optimal performance and minimize noise generation. Malfunctioning components, worn-out bearings, or imbalanced fans can contribute to increased noise levels. By conducting routine maintenance and addressing any issues promptly, the noise levels can be kept under control.
• Regulatory Compliance: Noise regulations and guidelines may vary depending on the jurisdiction and the specific industrial sector. It is important to assess and comply with applicable noise regulations to ensure that the RTO’s operation meets the required noise limits.

Overall, while RTOs can produce noise during operation, appropriate design considerations, noise control measures, and compliance with applicable regulations can help mitigate the impact of the noise. Consulting with RTO manufacturers, acoustical engineers, or environmental consultants can provide valuable insights and recommendations for managing noise associated with RTO operation.

Can regenerative thermal oxidizers be used for treating emissions from paint booths?

Yes, regenerative thermal oxidizers (RTOs) can be effectively used for treating emissions from paint booths. Paint booths generate volatile organic compounds (VOCs) and hazardous air pollutants (HAPs) during the painting process, which need to be controlled to comply with environmental regulations and ensure air quality. Here are some key points regarding the use of RTOs for treating emissions from paint booths:

• Emission Control: RTOs are designed to achieve high destruction efficiencies for VOCs and HAPs. These pollutants are oxidized within the RTO at high temperatures, typically above 95% efficiency, converting them into carbon dioxide (CO₂) and water vapor. This ensures effective control and reduction of emissions from the paint booth.
• Paint Booth Compatibility: RTOs can be integrated into the exhaust system of paint booths, capturing and treating the emissions before they are released into the atmosphere. The RTO is typically connected to the exhaust stack of the paint booth, allowing the VOC-laden air to pass through the oxidizer for treatment.
• Thermal Capacity: Paint booth emissions can vary in terms of flow rate, temperature, and concentration of VOCs. RTOs are designed to handle a wide range of operating conditions and can accommodate high flow rates and elevated temperatures. The system’s thermal capacity ensures effective treatment of emissions from paint booths, even during peak production periods.
• Heat Recovery: RTOs incorporate heat exchange systems that allow for the recovery and reuse of thermal energy. The heat exchangers within the RTO capture the heat from the outgoing exhaust gases and transfer it to the incoming process air or gas stream. This heat recovery process improves the overall energy efficiency of the system and reduces the need for additional fuel consumption.
• Compliance with Regulations: Paint booth emissions are subject to regulatory requirements for air quality and emissions control. RTOs are capable of achieving the necessary destruction efficiencies and can help paint booth operators comply with environmental regulations. The use of RTOs demonstrates a commitment to sustainable practices and responsible management of air emissions.

It is important to note that the specific design and configuration of the RTO, as well as the characteristics of the paint booth emissions, should be considered when implementing an RTO for a paint booth application. Consulting with experienced engineers or RTO manufacturers can provide valuable insights into the proper sizing, integration, and performance requirements for treating emissions from paint booths.

In summary, RTOs are a suitable and effective technology for treating emissions from paint booths, providing high destruction efficiencies, compatibility with paint booth exhaust systems, thermal capacity for varying operating conditions, heat recovery, and compliance with environmental regulations.

What is a regenerative thermal oxidizer?

A regenerative thermal oxidizer (RTO) is an advanced air pollution control device used in industrial applications to remove volatile organic compounds (VOCs), hazardous air pollutants (HAPs), and other airborne contaminants from exhaust gases. It operates by using high temperatures to thermally decompose or oxidize the pollutants, converting them into less harmful byproducts.

How does a regenerative thermal oxidizer work?

An RTO consists of several key components and operates through a cyclical process:

1. Inlet Plenum: The exhaust gases containing pollutants enter the RTO through the inlet plenum.

2. Heat Exchanger Beds: The RTO contains multiple heat exchanger beds filled with heat storage media, typically ceramic materials or structured packing. The heat exchanger beds are arranged in pairs.

3. Flow Control Valves: Flow control valves direct the airflow and control the direction of the exhaust gases through the RTO.

4. Combustion Chamber: The exhaust gases, now directed into the combustion chamber, are heated to a high temperature, typically between 1400°F (760°C) and 1600°F (870°C). This temperature range ensures effective thermal oxidation of the pollutants.

5. VOC Destruction: The high temperature in the combustion chamber causes the VOCs and other contaminants to react with oxygen, resulting in their thermal decomposition or oxidation. This process breaks down the pollutants into water vapor, carbon dioxide, and other harmless gases.

6. Heat Recovery: The hot, purified gases leaving the combustion chamber pass through the outlet plenum and flow through the heat exchanger beds that are in the opposite phase of operation. The heat storage media in the beds absorb heat from the outgoing gases, which preheats the incoming exhaust gases.

7. Cycle Switching: After a specific time interval, the flow control valves switch the airflow direction, allowing the heat exchanger beds that were preheating the incoming gases to now receive the hot gases from the combustion chamber. The cycle then repeats, ensuring continuous and efficient operation.

Advantages of regenerative thermal oxidizers:

RTOs offer several advantages in industrial air pollution control:

1. High Efficiency: RTOs can achieve high destruction efficiencies, typically above 95%, effectively removing a wide range of pollutants.

2. Energy Recovery: The heat recovery mechanism in RTOs allows for significant energy savings. The preheating of incoming gases reduces the fuel consumption required for combustion, making RTOs energy-efficient.

3. Cost-effectiveness: Although the initial capital investment for an RTO can be significant, the long-term operational cost savings through energy recovery and high destruction efficiencies make it a cost-effective solution over the lifespan of the system.

4. Environmental Compliance: RTOs are designed to meet stringent emissions regulations and help industries comply with air quality standards and permits.

5. Versatility: RTOs can handle a wide range of process exhaust volumes and pollutant concentrations, making them suitable for various industrial applications.

Overall, regenerative thermal oxidizers are highly efficient and effective air pollution control devices widely used in industries to minimize emissions and ensure environmental compliance.

editor by CX 2024-03-28