China Professional Rto Bed Type/Chamber Type Rto Regenerative Thermal Oxidizer

Maklumat Asas.

Model NO.

RTO yang menakjubkan

taip

Insinerator

Penyelenggaraan Rendah

100

Operasi Mudah

100

Penjimatan Tenaga

100

Kecekapan Tinggi

100

Tanda dagangan

Bjamazing

Pakej Pengangkutan

Luar negara

Spesifikasi

111

asal usul

China

Kod HS

2221111

Penerangan Produk

RTO

Pengoksida Terma Penjanaan Semula

Compared with traditional catalytic combustion, direct thermal oxidizer, RTO has the merits of high heating efficiency, low operation cost, and the ability to treat large flux low concentration waste gas. When VOCs concentration is high, secondary heat recycle can be realized, which will greatly reduce the operation cost. Because RTO can preheat the waste gas by levels through ceramic heat accumulator, which could make the waste gas to be completely heated and cracked with no dead corner(treatment efficiency>99%),which reduce the NOX in the Exhausting gas, if the VOC density >1500mg/Nm3, when the waste gas reach cracking area, it has been heated up to cracking temperature by heat accumulator, the burner will be closed under this condition.

RTO can be devided into chamber type and rotary type according to difference operation mode. Rotary type RTO has advantages in system pressure, temperature stability, investment amount, etc

Regenerative Thermal Oxidizer, Regenerative Thermal Oxidizer, Regenerative Thermal Oxidizer,  Thermal Oxidizer, Thermal Oxidizer, Thermal Oxidizer, oxidizer, oxidizer, oxidizer, incinerator, incinerator, incinerator, waste gas treatment, waste gas treatment, waste gas treatment, VOC treatment, VOC treatment, VOC treatment, RTO, RTO, RTO, Rotary RTO, Rotary RTO, Rotary RTO, Chamber RTO, Chamber RTO, Chamber RTO

Alamat: tingkat 8, E1, bangunan Pinwei, jalan Dishengxi, Yizhuang, ZheJiang, China

Jenis Perniagaan: Pengeluar/Kilang, Syarikat Perdagangan

Julat Perniagaan: Elektrik & Elektronik, Peralatan & Komponen Industri, Jentera Pembuatan & Pemprosesan, Metalurgi, Mineral & Tenaga

Pensijilan Sistem Pengurusan: ISO 9001, ISO 14001

Produk Utama: Rto, Talian Salutan Warna, Talian Galvanisasi, Pisau Udara, Alat Ganti untuk Talian Pemprosesan, Coater, Peralatan Bebas, Gulung Sink, Projek Ubahsuai, Blower

Pengenalan Syarikat: ZheJiang Amazing Science & Technology Co., Ltd ialah sebuah syarikat berteknologi tinggi yang berkembang maju, terletak di ZheJiang Economic and Technological Development Area(BDA). Berpegang kepada konsep Realistik, Inovatif, Fokus dan Cekap, syarikat kami menyediakan perkhidmatan terutamanya dalam industri rawatan gas sisa (VOC) dan peralatan metalurgi China dan juga seluruh dunia. Kami mempunyai teknologi canggih dan pengalaman yang kaya dalam projek rawatan gas buangan VOC, yang rujukannya telah berjaya digunakan untuk industri salutan, getah, elektronik, percetakan, dll. Kami juga mempunyai pengumpulan teknologi selama bertahun-tahun dalam penyelidikan dan pembuatan flat talian pemprosesan keluli, dan mempunyai hampir 100 contoh aplikasi.

Syarikat kami menumpukan pada penyelidikan, reka bentuk, pengilangan, pemasangan dan pentauliahan sistem rawatan gas sisa organik VOC dan projek merombak dan mengemas kini untuk penjimatan tenaga dan perlindungan alam sekitar barisan pemprosesan keluli rata. Kami boleh menyediakan pelanggan penyelesaian lengkap untuk perlindungan alam sekitar, penjimatan tenaga, peningkatan kualiti produk dan aspek lain.

Kami juga terlibat dalam pelbagai alat ganti dan peralatan bebas untuk garis salutan warna, garis galvanizing, garis penjerukan, seperti penggelek, pengganding, penukar haba, recuperator, pisau udara, peniup, pengimpal, penyamara ketegangan, pas kulit, sambungan pengembangan, ricih, penyambung , penjahit, penunu, tiub berseri, motor gear, pengurang, dsb.

What are the limitations of regenerative thermal oxidizers?

While regenerative thermal oxidizers (RTOs) are widely used for air pollution control, they do have certain limitations that should be considered. Here are some key limitations of RTOs:

• High Capital Cost: RTOs typically have higher capital costs compared to other air pollution control technologies. The complexity of the regenerative heat exchanger system, which enables high energy efficiency, can contribute to the higher upfront investment required for RTO installation.
• Space Requirements: RTOs generally require a larger footprint compared to some other air pollution control devices. The presence of regenerative heat exchangers, combustion chambers, and associated equipment necessitates adequate space for installation. This can be a limitation for industries with limited available space.
• High Energy Consumption during Startup: RTOs require a certain amount of time and energy to reach their optimal operating temperature during startup. This initial energy consumption can be relatively high, and it is important to consider this aspect when planning the operational schedule and energy management of an RTO system.
• Limitations in Handling Low Concentration VOCs: RTOs may have limitations in effectively treating low concentration volatile organic compounds (VOCs). If the VOC concentrations in the exhaust gas are too low, the energy required to maintain the necessary temperature for oxidation may be higher than the energy released during the combustion process. In such cases, other air pollution control technologies or pre-concentration techniques may be more suitable.
• Particulate Matter Control: RTOs are not specifically designed for controlling particulate matter emissions. While they may provide some incidental removal of fine particulate matter, their removal efficiency for particulates is generally lower compared to dedicated particulate control devices such as fabric filters (baghouses) or electrostatic precipitators.
• Chemically Corrosive Gases: RTOs may not be suitable for treating exhaust gases containing highly corrosive compounds. The high temperatures within the RTO can accelerate corrosion of materials, and the presence of corrosive gases may require additional corrosion-resistant materials or alternative air pollution control technologies.

Despite these limitations, RTOs remain an effective and widely used technology for the destruction of gaseous pollutants in various industrial applications. It is important to evaluate the specific requirements, characteristics of the exhaust gases, and environmental regulations when considering the implementation of an RTO system.

What is the impact of regenerative thermal oxidizers on greenhouse gas emissions?

Regenerative thermal oxidizers (RTOs) play a significant role in reducing greenhouse gas emissions. They are effective in mitigating the release of volatile organic compounds (VOCs) and hazardous air pollutants (HAPs), which are major contributors to greenhouse gas emissions and air pollution. Here are some key points regarding the impact of RTOs on greenhouse gas emissions:

• VOC and HAP Destruction: RTOs are designed to achieve high destruction efficiencies for VOCs and HAPs. These pollutants, which are often emitted from industrial processes, are oxidized within the RTO at high temperatures, typically above 95% efficiency. By converting these pollutants into carbon dioxide (CO₂) and water vapor, RTOs prevent their release into the atmosphere, thereby reducing greenhouse gas emissions.
• Carbon Neutrality: While RTOs do produce CO₂ as a byproduct of the oxidation process, the net impact on greenhouse gas emissions is considered minimal. This is because the CO₂ generated by the RTO is derived from the VOCs and HAPs, which are themselves carbon-based compounds. The combustion of these pollutants in the RTO represents the conversion of carbon from one form to another, rather than introducing new carbon into the atmosphere. As a result, the overall carbon footprint is often considered neutral.
• Energy Efficiency: RTOs are designed to maximize energy efficiency by utilizing regenerative heat exchange systems. These systems recover and reuse a significant portion of the thermal energy from the exhaust gases, reducing the need for additional fuel consumption. By operating with high energy efficiency, RTOs help reduce the overall energy demand and associated greenhouse gas emissions from the facility.
• Pematuhan dengan Peraturan: RTOs are frequently used in industrial applications to meet regulatory requirements for emissions control. By implementing RTOs, industries can achieve compliance with stringent air quality regulations and reduce their greenhouse gas emissions. Governments and environmental agencies often encourage or mandate the installation of RTOs to promote sustainable practices and minimize the environmental impact of industrial activities.

It is important to note that the specific impact of RTOs on greenhouse gas emissions can vary depending on factors such as the type and concentration of pollutants being treated, the operating conditions of the RTO, and the overall energy efficiency of the facility. Additionally, it is crucial to properly operate and maintain RTOs to ensure optimal performance and emissions control.

Overall, RTOs contribute to the reduction of greenhouse gas emissions by effectively controlling and destroying VOCs and HAPs, promoting energy efficiency, and facilitating compliance with environmental regulations.

Apakah pengoksida terma regeneratif?

Pengoksida terma regeneratif (RTO) ialah peranti kawalan pencemaran udara termaju yang digunakan dalam aplikasi industri untuk membuang sebatian organik meruap (VOC), bahan cemar udara berbahaya (HAP) dan bahan cemar bawaan udara lain daripada gas ekzos. Ia beroperasi dengan menggunakan suhu tinggi untuk mengurai atau mengoksidakan bahan pencemar secara terma, menukarkannya kepada produk sampingan yang kurang berbahaya.

Bagaimanakah pengoksida terma regeneratif berfungsi?

RTO terdiri daripada beberapa komponen utama dan beroperasi melalui proses kitaran:

1. Plenum Masuk: Gas ekzos yang mengandungi bahan pencemar memasuki RTO melalui plenum masuk.

2. Katil Penukar Haba: RTO mengandungi berbilang katil penukar haba yang diisi dengan media penyimpanan haba, biasanya bahan seramik atau pembungkusan berstruktur. Katil penukar haba disusun secara berpasangan.

3. Injap Kawalan Aliran: Injap kawalan aliran mengarahkan aliran udara dan mengawal arah gas ekzos melalui RTO.

4. Kebuk Pembakaran: Gas ekzos, kini diarahkan ke dalam kebuk pembakaran, dipanaskan pada suhu tinggi, biasanya antara 1400°F (760°C) dan 1600°F (870°C). Julat suhu ini memastikan pengoksidaan haba yang berkesan bagi bahan pencemar.

5. Kemusnahan VOC: Suhu tinggi dalam kebuk pembakaran menyebabkan VOC dan bahan cemar lain bertindak balas dengan oksigen, mengakibatkan penguraian haba atau pengoksidaan. Proses ini memecahkan bahan pencemar kepada wap air, karbon dioksida, dan gas tidak berbahaya yang lain.

6. Pemulihan Haba: Gas-gas panas dan tulen yang meninggalkan kebuk pembakaran melalui plenum alir keluar dan mengalir melalui katil penukar haba yang berada dalam fasa operasi yang bertentangan. Media penyimpanan haba di dalam katil menyerap haba daripada gas yang keluar, yang memanaskan gas ekzos yang masuk.

7. Penukaran Kitaran: Selepas selang masa tertentu, injap kawalan aliran menukar arah aliran udara, membenarkan katil penukar haba yang memanaskan gas masuk kini menerima gas panas daripada kebuk pembakaran. Kitaran kemudian berulang, memastikan operasi berterusan dan cekap.

Kelebihan pengoksida terma regeneratif:

RTO menawarkan beberapa kelebihan dalam kawalan pencemaran udara industri:

1. Kecekapan Tinggi: RTO boleh mencapai kecekapan pemusnahan yang tinggi, biasanya melebihi 95%, dengan berkesan menyingkirkan pelbagai jenis bahan pencemar.

2. Pemulihan Tenaga: Mekanisme pemulihan haba dalam RTO membolehkan penjimatan tenaga yang ketara. Pemanasan awal gas yang masuk mengurangkan penggunaan bahan api yang diperlukan untuk pembakaran, menjadikan RTO cekap tenaga.

3. Keberkesanan kos: Walaupun pelaburan modal awal untuk RTO boleh menjadi ketara, penjimatan kos operasi jangka panjang melalui pemulihan tenaga dan kecekapan pemusnahan yang tinggi menjadikannya penyelesaian yang kos efektif sepanjang jangka hayat sistem.

4. Pematuhan Alam Sekitar: RTO direka bentuk untuk memenuhi peraturan pelepasan yang ketat dan membantu industri mematuhi piawaian dan permit kualiti udara.

5. serba boleh: RTO boleh mengendalikan pelbagai volum ekzos proses dan kepekatan pencemar, menjadikannya sesuai untuk pelbagai aplikasi perindustrian.

Secara keseluruhannya, pengoksida terma regeneratif adalah peranti kawalan pencemaran udara yang sangat cekap dan berkesan digunakan secara meluas dalam industri untuk meminimumkan pelepasan dan memastikan pematuhan alam sekitar.

editor by CX 2023-09-14