China manufacturer Rto/Regenerative Thermal Oxidizer - RTO

Maklumat Asas.

Model NO.

RTO yang menakjubkan

taip

Insinerator

Penyelenggaraan Rendah

100

Operasi Mudah

100

Penjimatan Tenaga

100

Kecekapan Tinggi

100

Tanda dagangan

Bjamazing

Pakej Pengangkutan

Luar negara

Spesifikasi

111

asal usul

China

Kod HS

2221111

Penerangan Produk

RTO

Pengoksida Terma Penjanaan Semula

Compared with traditional catalytic combustion, direct thermal oxidizer, RTO has the merits of high heating efficiency, low operation cost, and the ability to treat large flux low concentration waste gas. When VOCs concentration is high, secondary heat recycle can be realized, which will greatly reduce the operation cost. Because RTO can preheat the waste gas by levels through ceramic heat accumulator, which could make the waste gas to be completely heated and cracked with no dead corner(treatment efficiency>99%),which reduce the NOX in the Exhausting gas, if the VOC density >1500mg/Nm3, when the waste gas reach cracking area, it has been heated up to cracking temperature by heat accumulator, the burner will be closed under this condition.

RTO can be devided into chamber type and rotary type according to difference operation mode. Rotary type RTO has advantages in system pressure, temperature stability, investment amount, etc

jenis RTO	Kecekapan		Perubahan tekanan (mmAq)	Saiz	(max)Treatment volume
jenis RTO	Kecekapan rawatan	Kecekapan kitar semula haba	Perubahan tekanan (mmAq)	Saiz	(max)Treatment volume
RTO jenis putar	99 %	97 %	0-4	kecil (1 time)	50000Nm3/h
RTO jenis tiga ruang	99 %	97 %	0-10	besar (1.5times)	100000Nm3/h
RTO jenis dua ruang	95 %	95 %	0-20	tengah (1.2times)	100000Nm3/h

Regenerative Thermal Oxidizer, Regenerative Thermal Oxidizer, Regenerative Thermal Oxidizer, Thermal Oxidizer, Thermal Oxidizer, Thermal Oxidizer, oxidizer, oxidizer, oxidizer, incinerator, incinerator, incinerator, waste gas treatment, waste gas treatment, waste gas treatment, VOC treatment, VOC treatment, VOC treatment, RTO, RTO, RTO, Rotary RTO, Rotary RTO, Rotary RTO, Chamber RTO, Chamber RTO, Chamber RTO

Alamat: tingkat 8, E1, bangunan Pinwei, jalan Dishengxi, Yizhuang, ZheJiang, China

Jenis Perniagaan: Pengeluar/Kilang, Syarikat Perdagangan

Julat Perniagaan: Elektrik & Elektronik, Peralatan & Komponen Industri, Jentera Pembuatan & Pemprosesan, Metalurgi, Mineral & Tenaga

Pensijilan Sistem Pengurusan: ISO 9001, ISO 14001

Produk Utama: Rto, Talian Salutan Warna, Talian Galvanisasi, Pisau Udara, Alat Ganti untuk Talian Pemprosesan, Coater, Peralatan Bebas, Gulung Sink, Projek Ubahsuai, Blower

Pengenalan Syarikat: ZheJiang Amazing Science & Technology Co., Ltd ialah sebuah syarikat berteknologi tinggi yang berkembang maju, terletak di ZheJiang Economic and Technological Development Area(BDA). Berpegang kepada konsep Realistik, Inovatif, Fokus dan Cekap, syarikat kami menyediakan perkhidmatan terutamanya dalam industri rawatan gas sisa (VOC) dan peralatan metalurgi China dan juga seluruh dunia. Kami mempunyai teknologi canggih dan pengalaman yang kaya dalam projek rawatan gas buangan VOC, yang rujukannya telah berjaya digunakan untuk industri salutan, getah, elektronik, percetakan, dll. Kami juga mempunyai pengumpulan teknologi selama bertahun-tahun dalam penyelidikan dan pembuatan flat talian pemprosesan keluli, dan mempunyai hampir 100 contoh aplikasi.

Syarikat kami menumpukan pada penyelidikan, reka bentuk, pengilangan, pemasangan dan pentauliahan sistem rawatan gas sisa organik VOC dan projek merombak dan mengemas kini untuk penjimatan tenaga dan perlindungan alam sekitar barisan pemprosesan keluli rata. Kami boleh menyediakan pelanggan penyelesaian lengkap untuk perlindungan alam sekitar, penjimatan tenaga, peningkatan kualiti produk dan aspek lain.

Kami juga terlibat dalam pelbagai alat ganti dan peralatan bebas untuk garis salutan warna, garis galvanizing, garis penjerukan, seperti penggelek, pengganding, penukar haba, recuperator, pisau udara, peniup, pengimpal, penyamara ketegangan, pas kulit, sambungan pengembangan, ricih, penyambung , penjahit, penunu, tiub berseri, motor gear, pengurang, dsb.

pengoksida terma regeneratif

Bolehkah pengoksida terma regeneratif digunakan untuk merawat air sisa industri?

Tidak, pengoksida terma regeneratif (RTO) biasanya tidak digunakan untuk merawat air sisa industri. RTO direka khusus untuk kawalan pencemaran udara dan rawatan bahan pencemar gas, seperti sebatian organik meruap (VOC) dan bahan pencemar udara berbahaya (HAP).

Berikut adalah beberapa perkara penting untuk dipertimbangkan mengenai penggunaan RTO untuk merawat air sisa industri:

Prinsip Operasi: RTO bergantung pada pembakaran bahan pencemar dalam fasa gas. Mereka menggunakan suhu tinggi untuk mengoksidakan bahan pencemar gas secara terma, menukarkannya kepada karbon dioksida dan wap air. Walau bagaimanapun, rawatan air sisa melibatkan penyingkiran atau transformasi bahan cemar yang terlarut atau terampai dalam air, yang memerlukan mekanisme rawatan yang berbeza.
Teknologi Rawatan Air Sisa: Rawatan air sisa biasanya melibatkan proses seperti pengasingan fizikal, rawatan kimia, rawatan biologi dan teknik khusus lain bergantung pada sifat bahan cemar. Teknologi rawatan air sisa biasa termasuk sistem enap cemar teraktif, tangki pemendapan, pemendakan kimia, penapisan dan pelbagai kaedah lain yang disesuaikan dengan ciri air sisa tertentu.
Peraturan Alam Sekitar: Rawatan air sisa industri tertakluk kepada peraturan alam sekitar yang ketat dan piawaian pelepasan yang mengawal kualiti efluen yang dilepaskan ke dalam badan air. Pematuhan terhadap peraturan ini memerlukan pelaksanaan teknologi rawatan air sisa yang sesuai yang direka khusus untuk penyingkiran atau pengurangan bahan cemar dalam air, dan bukannya teknologi kawalan pencemaran udara seperti RTO.
Integrasi dengan Sistem Rawatan Air Sisa: Walaupun RTO tidak digunakan untuk rawatan air sisa, ia mungkin disepadukan ke dalam keseluruhan sistem proses industri di mana rawatan air sisa juga diperlukan. Dalam kes sedemikian, teknologi rawatan air sisa yang berasingan digunakan untuk merawat air sisa, dan RTO digunakan untuk menangani pelepasan udara yang terhasil daripada proses rawatan air sisa atau operasi industri lain.

Ringkasnya, pengoksida terma regeneratif tidak sesuai untuk merawat air sisa industri. Ia direka untuk kawalan pencemaran udara dan pemusnahan bahan pencemar gas. Untuk rawatan air sisa yang berkesan, industri harus menggunakan teknologi rawatan air sisa yang sesuai yang direka khusus untuk penyingkiran atau transformasi bahan cemar dalam air.

pengoksida terma regeneratif

Are regenerative thermal oxidizers suitable for controlling emissions from food processing operations?

Yes, regenerative thermal oxidizers (RTOs) can be suitable for controlling emissions from food processing operations. Food processing operations often generate volatile organic compounds (VOCs) and odorous compounds that need to be controlled to comply with environmental regulations and maintain air quality. Here are some key points regarding the suitability of RTOs for controlling emissions from food processing operations:

Kawalan pelepasan: RTOs are designed to achieve high destruction efficiencies for VOCs and odorous compounds. These pollutants are oxidized within the RTO at high temperatures, typically above 95% efficiency, converting them into carbon dioxide (CO₂) and water vapor. This ensures effective control and reduction of emissions from food processing operations.
Keserasian Proses: RTOs can be integrated into the exhaust systems of various food processing operations, capturing and treating the emissions before they are released into the atmosphere. The RTO is typically connected to the process equipment or exhaust stack, allowing the VOC-laden air to pass through the oxidizer for treatment.
Fleksibiliti: RTOs offer flexibility in handling a wide range of operating conditions and pollutants. Food processing operations can vary in terms of flow rates, temperature, and composition of emissions. RTOs are designed to accommodate these variations and provide effective treatment even under fluctuating conditions.
Odor Control: In addition to VOCs, food processing operations can also generate odorous compounds, which can cause nuisance and odor-related complaints. RTOs can be equipped with additional odor control technologies such as activated carbon beds or scrubbers to address odor concerns and ensure the removal of unpleasant odors.
Pematuhan dengan Peraturan: Food processing operations are subject to regulatory requirements for air quality and emissions control. RTOs are capable of achieving the necessary destruction efficiencies and can help food processors comply with environmental regulations. The use of RTOs demonstrates a commitment to sustainable practices and responsible management of air emissions.

It is important to note that the specific design and configuration of the RTO, as well as the characteristics of the food processing emissions, should be considered when implementing an RTO for a specific application. Consulting with experienced engineers or RTO manufacturers can provide valuable insights into the proper sizing, integration, and performance requirements for controlling emissions from food processing operations.

In summary, RTOs are a suitable and effective technology for controlling emissions from food processing operations, providing high destruction efficiencies, compatibility with various processes, flexibility in handling operating conditions, odor control capabilities, and compliance with environmental regulations.

pengoksida terma regeneratif

How do regenerative thermal oxidizers compare to other air pollution control devices?

Regenerative thermal oxidizers (RTOs) are highly regarded air pollution control devices that offer several advantages over other commonly used air pollution control technologies. Here’s a comparison of RTOs with some other air pollution control devices:

Comparison	Pengoksida Terma Regeneratif (RTO)	Electrostatic Precipitators (ESPs)	Scrubbers
Kecekapan	RTOs achieve high VOC destruction efficiency, typically exceeding 99%. They are highly effective in destroying volatile organic compounds (VOCs) and hazardous air pollutants (HAPs).	ESPs are effective in collecting particulate matter, such as dust and smoke, but they are less effective in destroying VOCs and HAPs.	Scrubbers are efficient in removing certain pollutants, such as gases and particulate matter, but their performance may vary depending on the specific pollutants being targeted.
Kebolehgunaan	RTOs are suitable for a wide range of industries and applications, including high-volume exhaust gases. They can handle varying concentrations and types of pollutants.	ESPs are commonly used for particulate matter control in applications such as power plants, cement kilns, and steel mills. They are less suitable for VOC and HAP control.	Scrubbers are widely used for removing acid gases, such as sulfur dioxide (SO2) and hydrogen chloride (HCl), as well as certain odorous compounds. They are often employed in industries such as chemical manufacturing and wastewater treatment.
Energy Efficiency	RTOs incorporate heat recovery systems that allow for significant energy savings. They can achieve high thermal efficiency by preheating the incoming process air using the heat from the outgoing exhaust stream.	ESPs consume relatively low energy compared to other technologies, but they do not offer heat recovery capabilities.	Scrubbers generally consume more energy compared to RTOs and ESPs due to the energy required for liquid atomization and pumping. However, some scrubber designs may incorporate heat recovery mechanisms.
Space Requirements	RTOs typically require more space compared to ESPs and certain scrubber designs due to the need for ceramic media beds and larger combustion chambers.	ESPs have a compact design and require less space compared to RTOs and some scrubber configurations.	Scrubber designs vary in size and complexity. Certain scrubber types, such as packed bed scrubbers, may require a larger footprint compared to RTOs and ESPs.
Penyelenggaraan	RTOs generally require regular maintenance of components such as valves, dampers, and ceramic media beds. Periodic media replacement may be necessary depending on the operating conditions.	ESPs require periodic cleaning of collection plates and electrodes. Maintenance activities involve the removal of accumulated particulate matter.	Scrubbers require maintenance of liquid circulation systems, pumps, and mist eliminators. Regular monitoring and adjustment of the chemical reagents used in the scrubbing process are also necessary.

It’s important to note that the selection of an air pollution control device depends on the specific pollutants, process conditions, regulatory requirements, and economic considerations of the industrial application. Each technology has its own advantages and limitations, and it’s essential to evaluate these factors to determine the most appropriate solution for effective air pollution control.

China manufacturer Rto/Regenerative Thermal Oxidizer
editor by CX 2023-10-14