China high quality Recuperative Thermal Oxidizer

Maklumat Asas.

Model NO.

Amazing TO

taip

Insinerator

Low Cost

100

Penjimatan Tenaga

100

Kecekapan Tinggi

100

Tanda dagangan

Bjamazing

Pakej Pengangkutan

Luar negara

Spesifikasi

123

asal usul

China

Kod HS

345

Penerangan Produk

Thermal oxidizer
TO (Thermal oxidizer) direct cracking is a common device for VOC treating. It has the feature of high efficiency and low investment cost
When CZPT grain is often generated during VOC air cracking, DTO is a better choice for VOC treating
 

RTO, RTO, thermal oxidizer, regenerative thermal oxidizer
Our company’s RTO(Abbreviation of Regenerative Thermal Oxidizer), is a high-efficiency treatment equipment for organic waste gas. Comparing to catalytic combustion or direct combustion, it has character of high thermal efficiency, low operation cost, coping with big amount low concentration waste gas. If concentration is slightly high, it is possible for waste heat recovery for dramatically reduction of production and operation cost.
It is applied to various industries, such as surface spraying and coating, automobile, electronics, pharmaceuticals, petrochemical and rubber production; It can cope with waste gas content, such as benzene, methylbenzene, dimethylbenzene, etc. 

Incinerator, Incinerator, Incinerator, RTO, RTO, thermal oxidizer, regenerative thermal oxidizer, waste gas treatment, VOC treatment, waste gas processing, VOC processing, incinerator, heat recycle, heat exchanger

Alamat: tingkat 8, E1, bangunan Pinwei, jalan Dishengxi, Yizhuang, ZheJiang, China

Jenis Perniagaan: Pengeluar/Kilang, Syarikat Perdagangan

Julat Perniagaan: Elektrik & Elektronik, Peralatan & Komponen Industri, Jentera Pembuatan & Pemprosesan, Metalurgi, Mineral & Tenaga

Pensijilan Sistem Pengurusan: ISO 9001, ISO 14001

Produk Utama: Rto, Talian Salutan Warna, Talian Galvanisasi, Pisau Udara, Alat Ganti untuk Talian Pemprosesan, Coater, Peralatan Bebas, Gulung Sink, Projek Ubahsuai, Blower

Pengenalan Syarikat: ZheJiang Amazing Science & Technology Co., Ltd ialah sebuah syarikat berteknologi tinggi yang berkembang maju, terletak di ZheJiang Economic and Technological Development Area(BDA). Berpegang kepada konsep Realistik, Inovatif, Fokus dan Cekap, syarikat kami menyediakan perkhidmatan terutamanya dalam industri rawatan gas sisa (VOC) dan peralatan metalurgi China dan juga seluruh dunia. Kami mempunyai teknologi canggih dan pengalaman yang kaya dalam projek rawatan gas buangan VOC, yang rujukannya telah berjaya digunakan untuk industri salutan, getah, elektronik, percetakan, dll. Kami juga mempunyai pengumpulan teknologi selama bertahun-tahun dalam penyelidikan dan pembuatan flat talian pemprosesan keluli, dan mempunyai hampir 100 contoh aplikasi.

Syarikat kami menumpukan pada penyelidikan, reka bentuk, pengilangan, pemasangan dan pentauliahan sistem rawatan gas sisa organik VOC dan projek merombak dan mengemas kini untuk penjimatan tenaga dan perlindungan alam sekitar barisan pemprosesan keluli rata. Kami boleh menyediakan pelanggan penyelesaian lengkap untuk perlindungan alam sekitar, penjimatan tenaga, peningkatan kualiti produk dan aspek lain.

Kami juga terlibat dalam pelbagai alat ganti dan peralatan bebas untuk garis salutan warna, garis galvanizing, garis penjerukan, seperti penggelek, pengganding, penukar haba, recuperator, pisau udara, peniup, pengimpal, penyamara ketegangan, pas kulit, sambungan pengembangan, ricih, penyambung , penjahit, penunu, tiub berseri, motor gear, pengurang, dsb.

Do regenerative thermal oxidizers require continuous monitoring and control?

Yes, regenerative thermal oxidizers (RTOs) typically require continuous monitoring and control to ensure optimal performance, efficient operation, and compliance with environmental regulations. Monitoring and control systems are essential components of an RTO that enable real-time tracking of various parameters and facilitate adjustments to maintain reliable and effective operation.

Here are some key reasons why continuous monitoring and control are important for RTOs:

• Performance Optimization: Continuous monitoring allows operators to assess the performance of the RTO in real-time. Parameters such as temperature, pressure, flow rates, and pollutant concentrations can be monitored to ensure that the RTO is operating within the desired range for optimal efficiency and pollutant destruction.
• Compliance Assurance: Continuous monitoring and control help ensure compliance with environmental regulations and emission limits. By monitoring pollutant concentrations before and after the RTO, operators can verify that the system is effectively reducing emissions to meet regulatory requirements. Monitoring systems can also generate data logs and reports that can be used for compliance reporting purposes.
• Fault Detection and Diagnostics: Continuous monitoring allows for early detection of any malfunctions or deviations from normal operating conditions. By monitoring key parameters, operators can identify potential issues, such as sensor failures, valve malfunctions, or air leaks, and take corrective actions promptly. This proactive approach helps minimize downtime, optimize performance, and prevent potential safety hazards.
• Process Optimization: Monitoring and control systems provide valuable data that can be used to optimize the overall industrial process. By analyzing the data collected from the RTO, operators can identify opportunities for process improvements, energy savings, and operational efficiencies.
• Alarm and Safety Systems: Continuous monitoring enables the implementation of alarm and safety systems. If any parameter exceeds predefined thresholds or if critical malfunctions occur, the monitoring system can trigger alarms and alerts to notify operators and initiate appropriate response actions to mitigate risks.

Monitoring and control systems for RTOs typically include sensors, data acquisition systems, programmable logic controllers (PLCs), human-machine interfaces (HMIs), and specialized software. These systems provide real-time data visualization, historical data analysis, and remote access capabilities for effective monitoring and control of the RTO.

Overall, continuous monitoring and control are vital for ensuring the reliable and efficient operation of RTOs, optimizing performance, maintaining compliance, and facilitating proactive maintenance and process improvements.

Bagaimanakah pengoksida terma regeneratif mengendalikan pembentukan bahan zarahan dalam sistem?

Pengoksida terma penjanaan semula (RTO) menggunakan pelbagai mekanisme untuk mengendalikan pembentukan bahan zarahan dalam sistem. Bahan zarah, seperti habuk, jelaga atau zarah pepejal lain, boleh terkumpul dari semasa ke semasa dan berpotensi menjejaskan prestasi dan kecekapan RTO. Berikut ialah beberapa cara RTO mengendalikan pembentukan bahan zarahan:

• Pra-penapisan: RTO boleh menggabungkan sistem pra-penapisan, seperti siklon atau penapis beg, untuk mengeluarkan bahan zarahan yang lebih besar sebelum ia memasuki pengoksida. Pra-penapis ini menangkap dan mengumpul zarah, menghalangnya daripada memasuki RTO dan mengurangkan potensi pembentukan.
• Kesan Pembersihan Diri: RTO direka bentuk untuk mempunyai kesan pembersihan diri pada media pertukaran haba. Semasa operasi RTO, aliran gas ekzos panas melalui media boleh menyebabkan zarah terbakar atau hancur, meminimumkan pengumpulannya. Suhu tinggi dan aliran bergelora membantu mengekalkan permukaan bersih pada media, mengurangkan risiko pembentukan zarah yang ketara.
• Kitaran Pembersihan: RTO biasanya menggabungkan kitaran pembersihan sebagai sebahagian daripada operasi mereka. Kitaran ini melibatkan memasukkan aliran kecil udara bersih atau gas ke dalam sistem untuk membersihkan sebarang sisa zarahan. Udara pembersihan membantu menghilangkan atau membakar sebarang zarah yang melekat pada media, memastikan pembersihan berterusan.
• Penyelenggaraan Berkala: Penyelenggaraan tetap adalah penting untuk mengelakkan pembentukan bahan zarahan yang berlebihan dalam RTO. Aktiviti penyelenggaraan mungkin termasuk memeriksa dan membersihkan media pertukaran haba, memeriksa dan menggantikan sebarang gasket atau pengedap yang haus, dan memantau sistem untuk sebarang tanda pengumpulan zarah. Penyelenggaraan tetap membantu memastikan prestasi optimum dan meminimumkan risiko isu operasi yang berkaitan dengan pembentukan bahan zarahan.
• Pemantauan dan Penggera: RTO dilengkapi dengan sistem pemantauan yang menjejaki pelbagai parameter seperti pembezaan tekanan, suhu dan kadar aliran. Sistem ini boleh mengesan sebarang keadaan tidak normal atau penurunan tekanan yang berlebihan yang mungkin menunjukkan pembentukan bahan zarahan. Penggera dan amaran boleh dicetuskan untuk memberitahu pengendali, menggesa mereka untuk mengambil tindakan yang sewajarnya, seperti memulakan prosedur penyelenggaraan atau pembersihan.

Adalah penting untuk ambil perhatian bahawa strategi khusus yang digunakan untuk mengendalikan pembentukan bahan zarahan mungkin berbeza-beza bergantung pada reka bentuk dan konfigurasi RTO, serta ciri-ciri bahan zarahan yang dirawat. Pengilang dan pengendali RTO harus mempertimbangkan faktor-faktor ini dan melaksanakan langkah-langkah yang sesuai untuk memastikan pengurusan bahan zarahan yang berkesan dalam sistem.

Dengan menggabungkan pra-penapisan, menggunakan kesan pembersihan diri, melaksanakan kitaran pembersihan, menjalankan penyelenggaraan tetap dan menggunakan sistem pemantauan, RTO boleh mengendalikan dan mengurangkan pengumpulan bahan zarahan dengan berkesan, mengekalkan prestasi dan kecekapannya dari semasa ke semasa.

Can a regenerative thermal oxidizer handle high-volume exhaust gases?

Yes, a regenerative thermal oxidizer (RTO) is capable of handling high-volume exhaust gases emitted from industrial processes. RTOs are designed to handle a wide range of flow rates, including high-volume exhaust streams. Here are the reasons why RTOs are suitable for handling high-volume exhaust gases:

1. Scalability: RTOs are highly scalable and can be designed to accommodate varying exhaust gas volumes. The size and capacity of an RTO can be customized to match the specific requirements of the industrial process. This scalability allows RTOs to handle high-volume exhaust gases effectively.

2. Modular Design: RTOs often feature a modular design that allows multiple units to be installed in parallel. This modular configuration enables the treatment of large exhaust gas volumes by operating multiple RTO units simultaneously. The modular approach provides flexibility and ensures efficient handling of high-volume exhaust gases.

3. Large Heat Exchange Surface: RTOs incorporate structured ceramic media beds that provide a large heat exchange surface area. The media beds efficiently transfer heat between the incoming and outgoing gas streams, facilitating the oxidation of VOCs. The large heat exchange surface area enables RTOs to effectively handle high-volume exhaust gases while maintaining the required combustion temperature.

4. Heat Recovery: RTOs are known for their energy-efficient operation due to their heat recovery capabilities. The heat recovery system within an RTO captures and preheats the incoming process air by utilizing the heat energy from the outgoing exhaust stream. This heat recovery mechanism minimizes the energy consumption required to maintain the combustion temperature, making RTOs well-suited for handling high-volume exhaust gases without significantly increasing energy costs.

5. Effective Flow Distribution: RTOs are engineered to ensure proper flow distribution within the system. The design includes appropriate ductwork, valves, and dampers to evenly distribute the exhaust gases across the ceramic media beds. Effective flow distribution prevents preferential flow paths and ensures that all exhaust gases receive sufficient residence time for complete VOC destruction, even in high-volume exhaust gas applications.

6. Advanced Control Systems: Modern RTOs are equipped with advanced control systems that optimize the performance of the system. These control systems monitor and regulate various parameters, including temperature, airflow, and valve sequencing. The control systems adapt to the fluctuating exhaust gas volumes and maintain the required combustion temperature, ensuring efficient handling of high-volume exhaust gases.

In summary, regenerative thermal oxidizers (RTOs) are capable of effectively handling high-volume exhaust gases. Their scalability, modular design, large heat exchange surface, heat recovery capabilities, effective flow distribution, and advanced control systems make RTOs well-suited for industrial processes that generate substantial exhaust gas volumes.

editor by CX 2023-09-08