China wholesaler Recuperative Thermal Oxidizer

Maklumat Asas.

Model NO.

Amazing TO

taip

Insinerator

Low Cost

100

Penjimatan Tenaga

100

Kecekapan Tinggi

100

Tanda dagangan

Bjamazing

Pakej Pengangkutan

Luar negara

Spesifikasi

123

asal usul

China

Kod HS

345

Penerangan Produk

Thermal oxidizer
TO (Thermal oxidizer) direct cracking is a common device for VOC treating. It has the feature of high efficiency and low investment cost
When CHINAMFG grain is often generated during VOC air cracking, DTO is a better choice for VOC treating
 

RTO, RTO, thermal oxidizer, regenerative thermal oxidizer
Our company’s RTO(Abbreviation of Regenerative Thermal Oxidizer), is a high-efficiency treatment equipment for organic waste gas. Comparing to catalytic combustion or direct combustion, it has character of high thermal efficiency, low operation cost, coping with big amount low concentration waste gas. If concentration is slightly high, it is possible for waste heat recovery for dramatically reduction of production and operation cost.
It is applied to various industries, such as surface spraying and coating, automobile, electronics, pharmaceuticals, petrochemical and rubber production; It can cope with waste gas content, such as benzene, methylbenzene, dimethylbenzene, etc. 

Incinerator, Incinerator, Incinerator, RTO, RTO, thermal oxidizer, regenerative thermal oxidizer, waste gas treatment, VOC treatment, waste gas processing, VOC processing, incinerator, heat recycle, heat exchanger

Alamat: tingkat 8, E1, bangunan Pinwei, jalan Dishengxi, Yizhuang, ZheJiang, China

Jenis Perniagaan: Pengeluar/Kilang, Syarikat Perdagangan

Julat Perniagaan: Elektrik & Elektronik, Peralatan & Komponen Industri, Jentera Pembuatan & Pemprosesan, Metalurgi, Mineral & Tenaga

Pensijilan Sistem Pengurusan: ISO 9001, ISO 14001

Produk Utama: Rto, Talian Salutan Warna, Talian Galvanisasi, Pisau Udara, Alat Ganti untuk Talian Pemprosesan, Coater, Peralatan Bebas, Gulung Sink, Projek Ubahsuai, Blower

Pengenalan Syarikat: ZheJiang Amazing Science & Technology Co., Ltd ialah sebuah syarikat berteknologi tinggi yang berkembang maju, terletak di ZheJiang Economic and Technological Development Area(BDA). Berpegang kepada konsep Realistik, Inovatif, Fokus dan Cekap, syarikat kami menyediakan perkhidmatan terutamanya dalam industri rawatan gas sisa (VOC) dan peralatan metalurgi China dan juga seluruh dunia. Kami mempunyai teknologi canggih dan pengalaman yang kaya dalam projek rawatan gas buangan VOC, yang rujukannya telah berjaya digunakan untuk industri salutan, getah, elektronik, percetakan, dll. Kami juga mempunyai pengumpulan teknologi selama bertahun-tahun dalam penyelidikan dan pembuatan flat talian pemprosesan keluli, dan mempunyai hampir 100 contoh aplikasi.

Syarikat kami menumpukan pada penyelidikan, reka bentuk, pengilangan, pemasangan dan pentauliahan sistem rawatan gas sisa organik VOC dan projek merombak dan mengemas kini untuk penjimatan tenaga dan perlindungan alam sekitar barisan pemprosesan keluli rata. Kami boleh menyediakan pelanggan penyelesaian lengkap untuk perlindungan alam sekitar, penjimatan tenaga, peningkatan kualiti produk dan aspek lain.

Kami juga terlibat dalam pelbagai alat ganti dan peralatan bebas untuk garis salutan warna, garis galvanizing, garis penjerukan, seperti penggelek, pengganding, penukar haba, recuperator, pisau udara, peniup, pengimpal, penyamara ketegangan, pas kulit, sambungan pengembangan, ricih, penyambung , penjahit, penunu, tiub berseri, motor gear, pengurang, dsb.

Are regenerative thermal oxidizers suitable for controlling particulate matter emissions?

Regenerative thermal oxidizers (RTOs) are primarily designed for the destruction of volatile organic compounds (VOCs) and hazardous air pollutants (HAPs). While RTOs are highly effective in treating gaseous pollutants, they are not specifically designed for controlling particulate matter emissions.

Here are some key points to consider regarding the suitability of RTOs for controlling particulate matter emissions:

• Particulate Matter (PM) Removal Mechanism: RTOs primarily operate based on the thermal oxidation of pollutants. They rely on high temperatures to break down and destroy gaseous pollutants, but they do not have a dedicated mechanism for capturing and removing particulate matter. The design of RTOs does not incorporate features such as filters or electrostatic precipitators that are commonly used for effective particulate matter control.
• Limited Particulate Matter Destruction: While RTOs can provide some incidental removal of fine particulate matter through mechanisms like thermal decomposition and agglomeration, the removal efficiency for particulate matter is generally low compared to dedicated particulate control devices. The focus of RTOs is primarily on the destruction of gaseous pollutants rather than the capture and removal of particulates.
• Supplementary Particulate Control: In certain cases, supplementary particulate control devices may be integrated with RTOs to address particulate matter emissions. These devices, such as bag filters or electrostatic precipitators, can be installed downstream of the RTO to capture and remove particulates. This combination of an RTO with a separate particulate control device can help achieve comprehensive air pollution control for both gaseous pollutants and particulate matter.
• Consideration of Particulate Characteristics: When evaluating the suitability of RTOs for a specific application involving particulate matter emissions, it is crucial to consider the characteristics of the particulates, such as size, composition, and concentration. RTOs may be more effective in controlling certain types of coarse particulates compared to fine or ultrafine particulate matter.
• Alternative Technologies: For industries with significant particulate matter emissions, other air pollution control technologies specifically designed for particulate removal, such as fabric filters (baghouses), electrostatic precipitators, or wet scrubbers, may be more suitable and efficient.

In summary, while regenerative thermal oxidizers are highly effective for the destruction of gaseous pollutants, they are not specifically designed for controlling particulate matter emissions. If particulate matter control is a significant concern, supplementary particulate control devices or alternative technologies should be considered to ensure comprehensive air pollution control.

Bolehkah pengoksida terma regeneratif digunakan untuk merawat pelepasan daripada gerai cat?

Ya, pengoksida terma regeneratif (RTO) boleh digunakan dengan berkesan untuk merawat pelepasan daripada gerai cat. Gerai cat menjana sebatian organik meruap (VOC) dan bahan pencemar udara berbahaya (HAP) semasa proses mengecat, yang perlu dikawal untuk mematuhi peraturan alam sekitar dan memastikan kualiti udara. Berikut ialah beberapa perkara penting mengenai penggunaan RTO untuk merawat pelepasan daripada gerai cat:

• Kawalan pelepasan: RTO direka untuk mencapai kecekapan pemusnahan yang tinggi untuk VOC dan HAP. Bahan pencemar ini teroksida dalam RTO pada suhu tinggi, biasanya melebihi kecekapan 95%, menukarkannya kepada karbon dioksida (CO₂) dan wap air. Ini memastikan kawalan yang berkesan dan pengurangan pelepasan daripada gerai cat.
• Keserasian Gerai Cat: RTO boleh disepadukan ke dalam sistem ekzos gerai cat, menangkap dan merawat pelepasan sebelum dilepaskan ke atmosfera. RTO biasanya disambungkan ke timbunan ekzos gerai cat, membolehkan udara sarat VOC melalui pengoksida untuk rawatan.
• Kapasiti Terma: Pelepasan gerai cat boleh berbeza dari segi kadar aliran, suhu dan kepekatan VOC. RTO direka bentuk untuk mengendalikan pelbagai keadaan operasi dan boleh menampung kadar aliran tinggi dan suhu tinggi. Kapasiti terma sistem memastikan rawatan pelepasan yang berkesan dari gerai cat, walaupun semasa tempoh pengeluaran puncak.
• Pemulihan Haba: RTO menggabungkan sistem pertukaran haba yang membolehkan pemulihan dan penggunaan semula tenaga haba. Penukar haba dalam RTO menangkap haba daripada gas ekzos yang keluar dan memindahkannya ke aliran udara atau gas proses masuk. Proses pemulihan haba ini meningkatkan kecekapan tenaga keseluruhan sistem dan mengurangkan keperluan untuk penggunaan bahan api tambahan.
• Pematuhan dengan Peraturan: Pelepasan gerai cat tertakluk kepada keperluan pengawalseliaan untuk kualiti udara dan kawalan pelepasan. RTO mampu mencapai kecekapan pemusnahan yang diperlukan dan boleh membantu pengendali gerai cat mematuhi peraturan alam sekitar. Penggunaan RTO menunjukkan komitmen terhadap amalan mampan dan pengurusan pelepasan udara yang bertanggungjawab.

Adalah penting untuk ambil perhatian bahawa reka bentuk dan konfigurasi khusus RTO, serta ciri-ciri pelepasan gerai cat, harus dipertimbangkan semasa melaksanakan RTO untuk aplikasi gerai cat. Berunding dengan jurutera berpengalaman atau pengilang RTO boleh memberikan pandangan berharga tentang keperluan saiz, penyepaduan dan prestasi yang sesuai untuk merawat pelepasan daripada gerai cat.

Ringkasnya, RTO ialah teknologi yang sesuai dan berkesan untuk merawat pelepasan daripada gerai cat, menyediakan kecekapan pemusnahan yang tinggi, keserasian dengan sistem ekzos gerai cat, kapasiti terma untuk keadaan operasi yang berbeza-beza, pemulihan haba dan pematuhan kepada peraturan alam sekitar.

What industries commonly use regenerative thermal oxidizers?

Regenerative thermal oxidizers (RTOs) are widely used in various industries that generate volatile organic compounds (VOCs), hazardous air pollutants (HAPs), and other harmful emissions. Some of the industries that commonly use RTOs for air pollution control include:

• Chemical Manufacturing: RTOs are extensively employed in chemical manufacturing processes that produce solvents, paints, coatings, adhesives, and other chemical products. These industries often generate significant amounts of VOCs that require effective control and abatement.
• Printing and Packaging: The printing and packaging industry utilizes RTOs to control the emissions of VOCs and HAPs from ink drying, coating, and solvent-based processes. RTOs ensure compliance with environmental regulations while maintaining high-quality printing standards.
• Pharmaceuticals: Pharmaceutical manufacturing processes often involve the use of solvents and organic compounds, leading to the generation of VOCs. RTOs provide an effective solution for capturing and destroying these emissions, ensuring a safe and environmentally friendly production environment.
• Paint and Coatings: RTOs are commonly employed in paint and coatings manufacturing facilities to control VOC emissions during the curing and drying processes. By effectively destroying VOCs, RTOs help reduce the environmental impact of these industries while maintaining product quality.
• Furniture and Woodworking: The furniture and woodworking industry utilizes RTOs to control emissions from processes such as painting, staining, and varnishing. RTOs help remove VOCs and HAPs generated during these operations, promoting a healthier working environment and reducing the impact on surrounding communities.
• Food Processing: Certain food processing operations generate VOCs and odorous compounds. RTOs are used in these industries to capture and treat emissions from cooking, baking, frying, and other food-related processes. RTOs ensure compliance with air quality standards while minimizing the impact on food quality and safety.
• Chemical Storage and Handling: Facilities involved in the storage and handling of chemicals, such as bulk liquid terminals and chemical distribution centers, may utilize RTOs to control emissions from venting and vapor recovery systems. RTOs help mitigate the release of VOCs and HAPs during various storage and transfer operations.

These are just a few examples, and RTOs can be found in many other industries that generate VOCs and HAPs. RTOs provide a versatile and effective solution for air pollution control, ensuring compliance with environmental regulations and promoting sustainable industrial practices.

editor by CX 2023-09-28