Rto/Regenerative Thermal Oxidizer terbaik di China

Maklumat Asas.

Model NO.

RTO yang menakjubkan

taip

Insinerator

Penyelenggaraan Rendah

100

Operasi Mudah

100

Penjimatan Tenaga

100

Kecekapan Tinggi

100

Tanda dagangan

Bjamazing

Pakej Pengangkutan

Luar negara

Spesifikasi

111

asal usul

China

Kod HS

2221111

Penerangan Produk

RTO

Pengoksida Terma Penjanaan Semula

Compared with traditional catalytic combustion, direct thermal oxidizer, RTO has the merits of high heating efficiency, low operation cost, and the ability to treat large flux low concentration waste gas. When VOCs concentration is high, secondary heat recycle can be realized, which will greatly reduce the operation cost. Because RTO can preheat the waste gas by levels through ceramic heat accumulator, which could make the waste gas to be completely heated and cracked with no dead corner(treatment efficiency>99%),which reduce the NOX in the Exhausting gas, if the VOC density >1500mg/Nm3, when the waste gas reach cracking area, it has been heated up to cracking temperature by heat accumulator, the burner will be closed under this condition.

RTO can be devided into chamber type and rotary type according to difference operation mode. Rotary type RTO has advantages in system pressure, temperature stability, investment amount, etc

Regenerative Thermal Oxidizer, Regenerative Thermal Oxidizer, Regenerative Thermal Oxidizer,  Thermal Oxidizer, Thermal Oxidizer, Thermal Oxidizer, oxidizer, oxidizer, oxidizer, incinerator, incinerator, incinerator, waste gas treatment, waste gas treatment, waste gas treatment, VOC treatment, VOC treatment, VOC treatment, RTO, RTO, RTO, Rotary RTO, Rotary RTO, Rotary RTO, Chamber RTO, Chamber RTO, Chamber RTO

Alamat: tingkat 8, E1, bangunan Pinwei, jalan Dishengxi, Yizhuang, ZheJiang, China

Jenis Perniagaan: Pengeluar/Kilang, Syarikat Perdagangan

Julat Perniagaan: Elektrik & Elektronik, Peralatan & Komponen Industri, Jentera Pembuatan & Pemprosesan, Metalurgi, Mineral & Tenaga

Pensijilan Sistem Pengurusan: ISO 9001, ISO 14001

Produk Utama: Rto, Talian Salutan Warna, Talian Galvanisasi, Pisau Udara, Alat Ganti untuk Talian Pemprosesan, Coater, Peralatan Bebas, Gulung Sink, Projek Ubahsuai, Blower

Pengenalan Syarikat: ZheJiang Amazing Science & Technology Co., Ltd ialah sebuah syarikat berteknologi tinggi yang berkembang maju, terletak di ZheJiang Economic and Technological Development Area(BDA). Berpegang kepada konsep Realistik, Inovatif, Fokus dan Cekap, syarikat kami menyediakan perkhidmatan terutamanya dalam industri rawatan gas sisa (VOC) dan peralatan metalurgi China dan juga seluruh dunia. Kami mempunyai teknologi canggih dan pengalaman yang kaya dalam projek rawatan gas buangan VOC, yang rujukannya telah berjaya digunakan untuk industri salutan, getah, elektronik, percetakan, dll. Kami juga mempunyai pengumpulan teknologi selama bertahun-tahun dalam penyelidikan dan pembuatan flat talian pemprosesan keluli, dan mempunyai hampir 100 contoh aplikasi.

Syarikat kami menumpukan pada penyelidikan, reka bentuk, pengilangan, pemasangan dan pentauliahan sistem rawatan gas sisa organik VOC dan projek merombak dan mengemas kini untuk penjimatan tenaga dan perlindungan alam sekitar barisan pemprosesan keluli rata. Kami boleh menyediakan pelanggan penyelesaian lengkap untuk perlindungan alam sekitar, penjimatan tenaga, peningkatan kualiti produk dan aspek lain.

Kami juga terlibat dalam pelbagai alat ganti dan peralatan bebas untuk garis salutan warna, garis galvanizing, garis penjerukan, seperti penggelek, pengganding, penukar haba, recuperator, pisau udara, peniup, pengimpal, penyamara ketegangan, pas kulit, sambungan pengembangan, ricih, penyambung , penjahit, penunu, tiub berseri, motor gear, pengurang, dsb.

What is the cost of installing a regenerative thermal oxidizer?

The cost of installing a regenerative thermal oxidizer (RTO) can vary significantly depending on several factors. These factors include the size and capacity of the RTO, the specific requirements of the application, site conditions, and any additional customization or engineering needed. However, it’s important to note that RTOs are generally considered a significant capital investment due to their complex design and high-performance capabilities.

Here are some cost considerations associated with installing an RTO:

• RTO Size and Capacity: The size and capacity of the RTO, typically measured in terms of exhaust flow rate and pollutant concentration, are important cost factors. Larger RTOs capable of handling higher exhaust volumes and pollutant concentrations generally have higher upfront costs compared to smaller units.
• Engineering and Customization: The engineering and customization requirements for integrating the RTO into the existing industrial process can impact the installation cost. This includes factors such as ductwork modifications, electrical connections, and any necessary process integration to ensure proper functioning of the RTO within the overall system.
• Site Preparation: The site where the RTO will be installed may require preparation to accommodate the equipment. This can involve constructing foundations, providing adequate space for the RTO and associated components, and ensuring proper access for installation and maintenance.
• Auxiliary Systems and Equipment: In addition to the RTO itself, there may be auxiliary systems and equipment required for effective operation. This can include pre-treatment systems, such as scrubbers or filters, heat recovery units, monitoring and control systems, and stack emissions monitoring equipment. The cost of these additional components should be considered in the overall installation cost.
• Installation Labor and Equipment: The cost of labor and equipment required for the installation process, including crane services and specialized contractors, should be factored into the overall cost. The complexity of the installation and any specific site challenges can influence these costs.
• Permits and Compliance: Obtaining necessary permits and complying with regulatory requirements can involve additional costs. This includes fees for environmental permits, engineering studies, emissions testing, and compliance documentation.

Due to the many variables involved, it is challenging to provide a specific cost range for installing an RTO. It is recommended to consult with reputable RTO manufacturers or engineering firms, who can assess the specific requirements of the application and provide detailed cost estimates based on the project scope.

What are the noise level requirements for regenerative thermal oxidizers in residential areas?

The noise level requirements for regenerative thermal oxidizers (RTOs) in residential areas can vary depending on local regulations and specific circumstances. RTOs are typically designed to minimize noise emissions to ensure compliance with applicable noise regulations and to avoid disturbances to nearby residents. Here are some key points regarding noise level requirements for RTOs in residential areas:

• Noise Regulations: Different regions or jurisdictions may have specific noise regulations that apply to industrial equipment, including RTOs. These regulations typically define permissible noise levels and may vary depending on the time of day (daytime versus nighttime) and the zoning of the area (residential, commercial, or industrial).
• Noise Assessment: Prior to installing an RTO in a residential area, it is common practice to conduct a noise assessment. This assessment evaluates the expected noise levels generated by the RTO and compares them against the applicable noise regulations. The assessment considers factors such as the equipment design, operating conditions, and distance from residential properties.
• Noise Mitigation: If the noise assessment indicates that the RTO may exceed the permissible noise levels, mitigation measures can be implemented. These measures may include the use of noise barriers or enclosures around the RTO, acoustic insulation, or the installation of sound-absorbing materials to reduce noise propagation. The goal is to ensure that the noise emissions from the RTO are within the acceptable limits specified by the regulations.
• Community Engagement: In some cases, community engagement and communication with nearby residents may be necessary to address concerns related to noise emissions. This can involve sharing information about the RTO’s design, operation, and noise mitigation measures to assure residents that their concerns are being addressed and that the RTO is in compliance with the applicable regulations.

It is important to note that specific noise level requirements and mitigation measures can vary depending on the local regulations and the unique characteristics of the residential area. Consulting with local authorities, environmental agencies, or acoustic specialists can provide guidance on the specific noise level requirements and mitigation strategies that apply to RTO installations in residential areas.

In summary, the noise level requirements for RTOs in residential areas are typically governed by local regulations. Conducting a noise assessment, implementing noise mitigation measures if necessary, and engaging with the community can help ensure compliance with noise regulations and minimize disturbances to nearby residents.

Apakah pengoksida terma regeneratif?

Pengoksida terma regeneratif (RTO) ialah peranti kawalan pencemaran udara termaju yang digunakan dalam aplikasi industri untuk membuang sebatian organik meruap (VOC), bahan cemar udara berbahaya (HAP) dan bahan cemar bawaan udara lain daripada gas ekzos. Ia beroperasi dengan menggunakan suhu tinggi untuk mengurai atau mengoksidakan bahan pencemar secara terma, menukarkannya kepada produk sampingan yang kurang berbahaya.

Bagaimanakah pengoksida terma regeneratif berfungsi?

RTO terdiri daripada beberapa komponen utama dan beroperasi melalui proses kitaran:

1. Plenum Masuk: Gas ekzos yang mengandungi bahan pencemar memasuki RTO melalui plenum masuk.

2. Katil Penukar Haba: RTO mengandungi berbilang katil penukar haba yang diisi dengan media penyimpanan haba, biasanya bahan seramik atau pembungkusan berstruktur. Katil penukar haba disusun secara berpasangan.

3. Injap Kawalan Aliran: Injap kawalan aliran mengarahkan aliran udara dan mengawal arah gas ekzos melalui RTO.

4. Kebuk Pembakaran: Gas ekzos, kini diarahkan ke dalam kebuk pembakaran, dipanaskan pada suhu tinggi, biasanya antara 1400°F (760°C) dan 1600°F (870°C). Julat suhu ini memastikan pengoksidaan haba yang berkesan bagi bahan pencemar.

5. Kemusnahan VOC: Suhu tinggi dalam kebuk pembakaran menyebabkan VOC dan bahan cemar lain bertindak balas dengan oksigen, mengakibatkan penguraian haba atau pengoksidaan. Proses ini memecahkan bahan pencemar kepada wap air, karbon dioksida, dan gas tidak berbahaya yang lain.

6. Pemulihan Haba: Gas-gas panas dan tulen yang meninggalkan kebuk pembakaran melalui plenum alir keluar dan mengalir melalui katil penukar haba yang berada dalam fasa operasi yang bertentangan. Media penyimpanan haba di dalam katil menyerap haba daripada gas yang keluar, yang memanaskan gas ekzos yang masuk.

7. Penukaran Kitaran: Selepas selang masa tertentu, injap kawalan aliran menukar arah aliran udara, membenarkan katil penukar haba yang memanaskan gas masuk kini menerima gas panas daripada kebuk pembakaran. Kitaran kemudian berulang, memastikan operasi berterusan dan cekap.

Kelebihan pengoksida terma regeneratif:

RTO menawarkan beberapa kelebihan dalam kawalan pencemaran udara industri:

1. Kecekapan Tinggi: RTO boleh mencapai kecekapan pemusnahan yang tinggi, biasanya melebihi 95%, dengan berkesan menyingkirkan pelbagai jenis bahan pencemar.

2. Pemulihan Tenaga: Mekanisme pemulihan haba dalam RTO membolehkan penjimatan tenaga yang ketara. Pemanasan awal gas yang masuk mengurangkan penggunaan bahan api yang diperlukan untuk pembakaran, menjadikan RTO cekap tenaga.

3. Keberkesanan kos: Walaupun pelaburan modal awal untuk RTO boleh menjadi ketara, penjimatan kos operasi jangka panjang melalui pemulihan tenaga dan kecekapan pemusnahan yang tinggi menjadikannya penyelesaian yang kos efektif sepanjang jangka hayat sistem.

4. Pematuhan Alam Sekitar: RTO direka bentuk untuk memenuhi peraturan pelepasan yang ketat dan membantu industri mematuhi piawaian dan permit kualiti udara.

5. serba boleh: RTO boleh mengendalikan pelbagai volum ekzos proses dan kepekatan pencemar, menjadikannya sesuai untuk pelbagai aplikasi perindustrian.

Secara keseluruhannya, pengoksida terma regeneratif adalah peranti kawalan pencemaran udara yang sangat cekap dan berkesan digunakan secara meluas dalam industri untuk meminimumkan pelepasan dan memastikan pematuhan alam sekitar.

editor by CX 2023-09-25