Categories: Blog o systému termického oxidátoru

systém termálního oxidace pro tisk

Thermal Oxidizer System for Printing

Printing is an essential aspect of many industries. However, the printing process produces harmful emissions in the form of volatile organic compounds (VOCs). These VOCs can cause significant health and environmental hazards when released into the atmosphere. To mitigate these risks, many printing industries implement thermal oxidizer systems.

Co je to systém termálního oxidátoru?

A systém termického oxidátoru is a pollution control technology used to eliminate harmful VOCs from industrial exhaust streams. It works by increasing the temperature of the exhaust stream, causing the organic compounds to break down into carbon dioxide and water vapor, which are released into the atmosphere harmlessly.

Typy systémů termického oxidátoru

Regenerativní termický oxidátor (RTO)

RTO is a widely used thermal oxidizer system in the printing industry. It is designed to handle large airflows and high concentrations of VOCs. RTOs use ceramic heat exchangers to recover heat from the exhaust stream and transfer it to the incoming process air. This helps to minimize operating costs by reducing the amount of fuel required to maintain the system’s temperature.

Recuperative Thermal Oxidizer (RCO)

RCO is another thermal oxidizer system used in the printing industry. It is designed to handle low to medium concentrations of VOCs and lower airflows. RCOs use a heat exchanger to preheat the incoming process air and reduce the amount of fuel required to maintain the system’s temperature. However, RCOs are less energy-efficient than RTOs.

Benefits of Thermal Oxidizer System for Printing

Výhody pro životní prostředí

Thermal oxidizer systems help to protect the environment by reducing the amount of harmful VOCs released into the atmosphere. This helps to prevent air pollution, which can cause respiratory problems and other health issues.

Úspory nákladů

Implementing a thermal oxidizer system can help printing industries save money by reducing the amount of fuel required to maintain the system’s temperature. This can result in significant cost savings over time.

Dodržování předpisů

Many countries have regulations in place that require industries to control their emissions of harmful pollutants. Implementing a thermal oxidizer system can help printing industries comply with these regulations and avoid potential fines and legal issues.

Závěr

Thermal oxidizer systems are essential for printing industries that want to mitigate the risks associated with VOC emissions. RTOs and RCOs are two common types of thermal oxidizer systems used in the printing industry. By implementing a thermal oxidizer system, printing industries can protect the environment, save costs, and comply with regulations.

O nás

We are a high-end equipment manufacturing enterprise specialized in comprehensive management of volatile organic compounds (VOCs) waste gas and carbon reduction and energy-saving technology. Our core technology team is from the Aerospace Liquid Rocket Engine Research Institute (Aerospace Six Institute), with more than 60 R&D technical personnel, including three senior engineers at the research fellow level and 16 senior engineers. We have four core technologies: thermal energy, combustion, sealing, and self-control. We have the ability to simulate temperature fields, air flow fields, model calculations, and the ability to test the properties of ceramic heat storage materials, molecular sieve adsorption materials, and high-temperature incineration and oxidation of VOCs organic compounds.

We have established an RTO technology research and development center and waste gas carbon reduction and engineering technology center in the ancient city of Xi’an, and a 30,000m2 production base in Yangling. The production and sales volume of RTO equipment ranks among the top in the world.

Naše platformy pro výzkum a vývoj

Highly Efficient Combustion Control Technology Test Bench: This platform is used for testing and verifying the combustion control technology of the equipment, which can effectively improve the combustion efficiency of the equipment and reduce the emission of pollutants.
Zkušební stolice pro účinnost adsorpce molekulárním sítem: This platform is used for testing and verifying the adsorption efficiency of molecular sieve materials, which can effectively improve the adsorption efficiency of the equipment and reduce the emission of pollutants.
Vysoce účinná zkušební lavice pro keramickou akumulaci tepla: This platform is used for testing and verifying the heat storage performance of ceramic heat storage materials, which can effectively improve the heat storage efficiency of the equipment and reduce energy consumption.
Zkušební stolice pro rekuperaci odpadního tepla s ultravysokými teplotami: This platform is used for testing and verifying the waste heat recovery system of the equipment, which can effectively improve the energy efficiency of the equipment and reduce energy consumption.
Zkušební stolice pro technologii těsnění plynných kapalin: This platform is used for testing and verifying the sealing performance of the equipment, which can effectively prevent gas leaks and improve the safety of the equipment.

Naše patenty a vyznamenání

On core technologies, we have applied for 68 patents, including 21 invention patents, and the patented technologies basically cover key components. Among them, four invention patents, 41 utility model patents, six appearance patents, and seven software copyrights have been authorized.

Naše výrobní kapacita

Automatická tryskání a lakovací linka na ocelové plechy a profily: This production line is used for the surface treatment of raw materials and ensures the quality of the equipment.
Ruční trysková výrobní linka: This production line is used for the surface treatment of special-shaped workpieces and ensures the quality of the equipment.
Zařízení pro odprašování a ochranu životního prostředí: This equipment is used to purify the waste gas generated during production, which can effectively reduce the emission of pollutants.
Automatická lakovna: This equipment is used for automatic painting of workpieces, which can effectively improve the quality and efficiency of painting.
Sušárna: This equipment is used for drying workpieces, which can effectively improve the quality and efficiency of painting.

Upřímně vítáme zákazníky ke spolupráci s námi. Mezi naše výhody patří:

Professional team with rich experience in the industry, providing high-quality equipment and services.
Advanced technology and strong R&D capability, ensuring the competitiveness of our equipment.
Strict quality control system and perfect after-sales service, ensuring the stable operation of the equipment.
Efficient and energy-saving equipment, effectively reducing customer production costs and improving production efficiency.
Flexible customization according to customer needs, providing personalized equipment solutions.
Global sales and service network, providing customers with timely and efficient services.

Autor: Miya

rtoadmin