China Good quality Rto Bed Type/Chamber Type Rto Regenerative Thermal Oxidizer

Basic Info.

Model NO.

Amazing RTO

Type

Incinerator

High Efficiency

100

Energy Saving

100

Low Maintenance

100

Easy Operation

100

Trademark

Bjamazing

Transport Package

Overseas

Specification

111

Origin

China

HS Code

2221111

Product Description

RTO

รีเจนเนอเรทีฟ เทอร์มอล อ็อกซิไดเซอร์

Compared with traditional catalytic combustion,; direct thermal oxidizer,; RTO has the merits of high heating efficiency,; low operation cost,; and the ability to treat large flux low concentration waste gas.; When VOCs concentration is high,; secondary heat recycle can be realized,; which will greatly reduce the operation cost.; Because RTO can preheat the waste gas by levels through ceramic heat accumulator,; which could make the waste gas to be completely heated and cracked with no dead corner(treatment efficiency>99%);,;which reduce the NOX in the Exhausting gas,; if the VOC density >1500mg/Nm3,; when the waste gas reach cracking area,; it has been heated up to cracking temperature by heat accumulator,; the burner will be closed under this condition.;

RTO can be devided into chamber type and rotary type according to difference operation mode.; Rotary type RTO has advantages in system pressure,; temperature stability,; investment amount,; etc

Regenerative Thermal Oxidizer,; Regenerative Thermal Oxidizer,; Regenerative Thermal Oxidizer,;  Thermal Oxidizer,; Thermal Oxidizer,; Thermal Oxidizer,; oxidizer,; oxidizer,; oxidizer,; incinerator,; incinerator,; incinerator,; waste gas treatment,; waste gas treatment,; waste gas treatment,; VOC treatment,; VOC treatment,; VOC treatment,; RTO,; RTO,; RTO,; Rotary RTO,; Rotary RTO,; Rotary RTO,; Chamber RTO,; Chamber RTO,; Chamber RTO

Address: 8 floor, E1, Pinwei building, Dishengxi road, Yizhuang, ZheJiang , China

Business Type: Manufacturer/Factory, Trading Company

Business Range: Electrical & Electronics, Industrial Equipment & Components, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy

Management System Certification: ISO 9001, ISO 14001

Main Products: Rto, Color Coating Line, Galvanizing Line, Air Knife, Spares for Processing Line, Coater, Independent Equipments, Sink Roll, Revamping Project, Blower

Company Introduction: ZheJiang Amazing Science & Technology Co., Ltd is a thriving Hi-tech company, located in ZheJiang Economic and Technological Development Area(BDA). Adhering to the concept of Realistic, Innovative, Focused and Efficient, our company mainly serve the waste gas treatment (VOCs) Industry and metallurgical equipment of China and even whole world. We have advanced technology and rich experience in VOCs waste gas treatment project, the reference of which has been successfully applied to the industry of coating, rubber, electronic, printing, etc. We also have years of technology accumulation in the research and manufacturing of flat steel processing line, and possess nearly 100 of application example.

Our company focus on the research, design, manufacturing, installation and commissioning of VOCs organic waste gas treatment system and the revamping and updating project for energy saving and environmental protection of flat steel processing line. We can provide customers the complete solutions for environmental protection, energy saving, product quality improvement and other aspects.

We are also engaged in various spares and independent equipment for color coating line, galvanizing line, pickling line, like roller, coupler, heat exchanger, recuperator, air knife, blower, welder, tension leveler, skin pass, expansion joint, shear, jointer, stitcher, burner, radiant tube, gear motor, reducer, etc.

Do regenerative thermal oxidizers require continuous monitoring and control?

Yes, regenerative thermal oxidizers (RTOs) typically require continuous monitoring and control to ensure optimal performance, efficient operation, and compliance with environmental regulations. Monitoring and control systems are essential components of an RTO that enable real-time tracking of various parameters and facilitate adjustments to maintain reliable and effective operation.

Here are some key reasons why continuous monitoring and control are important for RTOs:

• Performance Optimization: Continuous monitoring allows operators to assess the performance of the RTO in real-time. Parameters such as temperature, pressure, flow rates, and pollutant concentrations can be monitored to ensure that the RTO is operating within the desired range for optimal efficiency and pollutant destruction.
• Compliance Assurance: Continuous monitoring and control help ensure compliance with environmental regulations and emission limits. By monitoring pollutant concentrations before and after the RTO, operators can verify that the system is effectively reducing emissions to meet regulatory requirements. Monitoring systems can also generate data logs and reports that can be used for compliance reporting purposes.
• Fault Detection and Diagnostics: Continuous monitoring allows for early detection of any malfunctions or deviations from normal operating conditions. By monitoring key parameters, operators can identify potential issues, such as sensor failures, valve malfunctions, or air leaks, and take corrective actions promptly. This proactive approach helps minimize downtime, optimize performance, and prevent potential safety hazards.
• Process Optimization: Monitoring and control systems provide valuable data that can be used to optimize the overall industrial process. By analyzing the data collected from the RTO, operators can identify opportunities for process improvements, energy savings, and operational efficiencies.
• Alarm and Safety Systems: Continuous monitoring enables the implementation of alarm and safety systems. If any parameter exceeds predefined thresholds or if critical malfunctions occur, the monitoring system can trigger alarms and alerts to notify operators and initiate appropriate response actions to mitigate risks.

Monitoring and control systems for RTOs typically include sensors, data acquisition systems, programmable logic controllers (PLCs), human-machine interfaces (HMIs), and specialized software. These systems provide real-time data visualization, historical data analysis, and remote access capabilities for effective monitoring and control of the RTO.

Overall, continuous monitoring and control are vital for ensuring the reliable and efficient operation of RTOs, optimizing performance, maintaining compliance, and facilitating proactive maintenance and process improvements.

What are the noise level requirements for regenerative thermal oxidizers in residential areas?

The noise level requirements for regenerative thermal oxidizers (RTOs) in residential areas can vary depending on local regulations and specific circumstances. RTOs are typically designed to minimize noise emissions to ensure compliance with applicable noise regulations and to avoid disturbances to nearby residents. Here are some key points regarding noise level requirements for RTOs in residential areas:

• Noise Regulations: Different regions or jurisdictions may have specific noise regulations that apply to industrial equipment, including RTOs. These regulations typically define permissible noise levels and may vary depending on the time of day (daytime versus nighttime) and the zoning of the area (residential, commercial, or industrial).
• Noise Assessment: Prior to installing an RTO in a residential area, it is common practice to conduct a noise assessment. This assessment evaluates the expected noise levels generated by the RTO and compares them against the applicable noise regulations. The assessment considers factors such as the equipment design, operating conditions, and distance from residential properties.
• Noise Mitigation: If the noise assessment indicates that the RTO may exceed the permissible noise levels, mitigation measures can be implemented. These measures may include the use of noise barriers or enclosures around the RTO, acoustic insulation, or the installation of sound-absorbing materials to reduce noise propagation. The goal is to ensure that the noise emissions from the RTO are within the acceptable limits specified by the regulations.
• Community Engagement: In some cases, community engagement and communication with nearby residents may be necessary to address concerns related to noise emissions. This can involve sharing information about the RTO’s design, operation, and noise mitigation measures to assure residents that their concerns are being addressed and that the RTO is in compliance with the applicable regulations.

It is important to note that specific noise level requirements and mitigation measures can vary depending on the local regulations and the unique characteristics of the residential area. Consulting with local authorities, environmental agencies, or acoustic specialists can provide guidance on the specific noise level requirements and mitigation strategies that apply to RTO installations in residential areas.

In summary, the noise level requirements for RTOs in residential areas are typically governed by local regulations. Conducting a noise assessment, implementing noise mitigation measures if necessary, and engaging with the community can help ensure compliance with noise regulations and minimize disturbances to nearby residents.

What is the lifespan of a regenerative thermal oxidizer?

The lifespan of a regenerative thermal oxidizer (RTO) can vary depending on several factors, including the quality of the equipment, proper maintenance, operating conditions, and technological advancements. Generally, a well-designed and properly maintained RTO can have a lifespan ranging from 15 to 25 years or more.

Here are some factors that can influence the lifespan of an RTO:

• Quality of Construction: RTOs constructed with high-quality materials, such as corrosion-resistant alloys and refractory linings, tend to have a longer lifespan. Robust construction ensures durability and resistance to the harsh operating conditions often encountered in industrial processes.
• Maintenance Practices: Regular and proactive maintenance is crucial to maximize the lifespan of an RTO. This includes periodic inspections, cleaning and replacement of components, such as valves, dampers, and ceramic media beds, and monitoring of operating parameters. Adequate maintenance helps prevent premature equipment failure and ensures optimal performance.
• Operating Conditions: The operating conditions of the RTO, such as temperature, gas composition, and particulate loading, can affect its lifespan. Operating the RTO within its design parameters and avoiding excessive thermal or chemical stresses can contribute to a longer lifespan.
• Technological Advancements: Over time, technological advancements may lead to the introduction of more efficient and durable components or improvements in the overall design of RTOs. Upgrading or retrofitting an older RTO with newer technologies can extend its lifespan and enhance its performance.
• Environmental Factors: Environmental factors, such as exposure to corrosive gases, high humidity, or harsh climates, can impact the lifespan of an RTO. Proper design considerations and protective measures, such as corrosion-resistant coatings or insulation, can mitigate these effects and prolong the equipment’s lifespan.

It is important to note that the lifespan mentioned is a general estimate and can vary depending on the specific circumstances. Regular inspections, maintenance, and adherence to manufacturer’s guidelines are essential to ensure the longevity and reliable operation of an RTO.

editor by CX 2024-03-13