{"id":5656,"date":"2026-03-25T07:24:37","date_gmt":"2026-03-25T07:24:37","guid":{"rendered":"https:\/\/regenerative-thermal-oxidizers.com\/?post_type=product&p=5656"},"modified":"2026-03-26T04:03:09","modified_gmt":"2026-03-26T04:03:09","slug":"wet-electrostatic-precipitation-wesp-wesp1w-240w-series","status":"publish","type":"product","link":"https:\/\/regenerative-thermal-oxidizers.com\/bg\/produkt\/wet-electrostatic-precipitation-wesp-wesp1w-240w-series\/","title":{"rendered":"Wet Electrostatic Precipitation WESP | WESP1W\/240W Series"},"content":{"rendered":"

 <\/p>\n

\n
\n

Terminal Exhaust Purification | Wet Electrostatic Precipitator (WESP)<\/span><\/h2>\n

WESP1W\/240W Series by Ever-power<\/h2>\n

Eradicate visible blue plumes, aggressive acid mists, and ultra-fine PM2.5 particulates to achieve true near-zero emissions. Designed as the ultimate downstream safeguard after Flue Gas Desulfurization (FGD), our WESP systems master saturated, corrosive gas streams, guaranteeing outlet emissions below 10 mg\/Nm3<\/strong> (and routinely < 5 mg\/Nm3) while protecting your stacks from catastrophic corrosion.<\/p>\n

Request Engineering Sizing<\/a><\/p>\n<\/div>\n<\/header>\n

 <\/p>\n

\n

\u2699\ufe0f Executive Engineering Brief<\/h2>\n
\n
\n

\ud83c\udf0a Volumetric Capacity<\/h3>\n
    \n
  • \ud83d\udcc9 Gas Volume:<\/strong> 10,000 to 2,400,000 m3\/h<\/li>\n
  • \ud83c\udf21\ufe0f Allowable Temp:<\/strong> 30 to 90 \u00b0C (Saturated)<\/li>\n
  • \ud83c\udf2b\ufe0f Inlet Dust\/Mist:<\/strong> 1 to 300 mg\/Nm3<\/li>\n
  • \u2696\ufe0f Casing Pressure:<\/strong> 2,000 to 20,000 Pa<\/li>\n<\/ul>\n<\/div>\n
    \n

    \ud83c\udfaf Purification Performance<\/h3>\n
      \n
    • \u2705 Outlet Emission:<\/strong> < 10 mg\/Nm3 (target < 5)<\/li>\n
    • \u2705 Operating Resistance:<\/strong> 300 to 500 Pa<\/li>\n
    • \u2705 Gas Velocity:<\/strong> 0.8 to 2.0 m\/s (Anode Tube)<\/li>\n
    • \u2705 Secondary Entrainment:<\/strong> Zero (Flushing System)<\/li>\n<\/ul>\n<\/div>\n
      \n

      \ud83d\udee1\ufe0f Core Materials & Architecture<\/h3>\n
        \n
      • \ud83d\udd0b Anode Tubes:<\/strong> Conductive FRP \/ 2205 SS Honeycomb<\/li>\n
      • \u26a1 Cathode Wires:<\/strong> Lead-Antimony \/ 2205 SS Barbed<\/li>\n
      • \u2699\ufe0f Distribution:<\/strong> X-type \/ Square \/ Round Screen<\/li>\n
      • \ud83d\udee1\ufe0f Insulation:<\/strong> Sealed Heated Insulator Box<\/li>\n<\/ul>\n<\/div>\n

        \"Wet<\/p>\n<\/div>\n<\/section>\n

        \n

        \ud83d\udcca Deep Technical Specifications (WESP1W\/240W Series)<\/h2>\n

        Ever-power’s WESP systems are highly modular, designed to scale seamlessly from boutique chemical calcination exhausts to massive utility-scale desulfurization effluents.<\/p>\n

        \n\n\n\n\n\n\n\n\n\n\n
        Structural Parameter<\/th>\nSpecification Range<\/th>\nEngineering Impact<\/th>\n<\/tr>\n<\/thead>\n
        Number of Modules<\/td>\n1 to 20 (pcs.)<\/td>\nModular design allows rapid scalability and limits downtime during localized maintenance.<\/td>\n<\/tr>\n
        Tubes per Module<\/td>\n10 to 180 (pcs.)<\/td>\nHoneycomb configuration mathematically maximizes the specific collection area within a confined footprint.<\/td>\n<\/tr>\n
        Anode Tube Height<\/td>\n6000 (mm)<\/td>\nProvides the precise residence time needed for sub-micron aerosols to migrate to the tube wall before gas exit.<\/td>\n<\/tr>\n
        Number of Electric Fields<\/td>\n1 to 10 (pcs.)<\/td>\nMulti-stage electrostatic charging guarantees ultra-low emissions regardless of initial contaminant loading.<\/td>\n<\/tr>\n
        Anode Tube Specifications<\/td>\nInscribed circle \u03c6300 \/ \u03c6360 (mm)<\/td>\nCalibrated to maintain optimal laminar velocity while resisting electrical arc-overs.<\/td>\n<\/tr>\n
        Total Filtration Area<\/td>\n100 to 20,000 (m2)<\/td>\nVast surface area enables unparalleled mass transfer of acid mists and fine particulate.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/section>\n
        \n

        \"Wet<\/h2>\n

        \ud83d\udd2c Process Mechanics & Internal Architecture<\/h2>\n
        \n
        \n

        The WESP Working Principle<\/h3>\n

        Unlike dry ESPs, the Ever-power WESP operates in a fully saturated gas environment (below dew point). It is specifically engineered to capture liquid aerosols, SO3 acid mists, and sticky dusts that would blind dry mechanical filters.<\/p>\n

        \"Wet<\/p>\n

          \n
        1. High-Voltage Ionization:<\/strong> Tens of thousands of volts of DC high voltage are applied between the Anode Tube and Cathode Wire. The intense electric field fully ionizes the saturated gas, generating massive quantities of electrons and ions.<\/li>\n
        2. Particle Charging:<\/strong> As dust-laden gas flows through, these ions collide with fine dust particles, droplets, and aerosols, heavily charging them.<\/li>\n
        3. Electrostatic Migration:<\/strong> Driven by Coulomb force, the charged particulate separates from the airflow and migrates rapidly toward the grounded Anode Tube inner wall.<\/li>\n
        4. Continuous Flushing:<\/strong> Adsorbed particles are trapped in a continuous water film. A Flushing System<\/strong> washes the tubes, allowing the slurry to flow into the lower liquid zone via gravity. No mechanical rapping is used<\/strong>, eliminating secondary dust entrainment.<\/li>\n<\/ol>\n

          \"Wet<\/p>\n<\/div>\n

          \n

          Advanced Internal Components<\/h3>\n

          Handling wet, corrosive, acid-rich gases requires exceptional material science and structural engineering:<\/p>\n

            \n
          • Anode Tubes:<\/strong> Manufactured from either Conductive Fiberglass (FRP) Honeycomb<\/strong> or 2205 Duplex Stainless Steel Honeycomb<\/strong>. These materials offer flawless electrical conductivity combined with absolute immunity to sulfuric and hydrochloric acid corrosion.<\/li>\n
          • Cathode Wires:<\/strong> Tailored to the flue gas chemistry, we deploy Lead-Antimony alloy, 2205 SS barbed, or tubular barbed wires. These provide a sharp, intense corona discharge and are anchored by our rigid Tensioning Device<\/strong> to prevent sway and shorting.<\/li>\n
          • Insulator Box:<\/strong> The most critical failure point in any WESP is high-voltage tracking over wet insulators. Our system utilizes a sealed, heated Insulator Box<\/strong> acting as a “protective umbrella,” ensuring high voltage is safely introduced without grounding out in the humid environment.<\/li>\n
          • High-Frequency Power Supply:<\/strong> Delivers rapid micro-pulses of DC voltage, adapting instantly to changes in gas moisture and minimizing spark-over energy.<\/li>\n<\/ul>\n

            \"Wet\"Wet<\/p>\n

            \"Wet<\/p>\n<\/div>\n<\/div>\n<\/section>\n

            \n

            \ud83d\ude80 Strategic Engineering Advantages<\/h2>\n
            \n
            \n

            Zero Secondary Entrainment<\/h3>\n

            Because the WESP uses a water film and flushing system instead of mechanical hammers (rapping), collected dust is permanently trapped in liquid. It is physically impossible for dust to re-enter the gas stream, securing your ultra-low emission guarantees.<\/p>\n<\/div>\n

            \n

            Total Plume & Mist Eradication<\/h3>\n

            Standard wet scrubbers fail to capture aerosols smaller than 2 microns. The Ever-power WESP captures sub-micron PM2.5, SO3 acid mists, and heavy metals, effectively eliminating the dreaded “blue plume” or “yellow plume” at your stack outlet.<\/p>\n<\/div>\n

            \n

            Low Resistance = Low OPEX<\/h3>\n

            Despite its massive capture efficiency, the aerodynamic open-tube design yields a system resistance of only 300 – 500 Pa<\/strong>. This saves massive amounts of ID fan electricity compared to high-energy venturi scrubbers.<\/p>\n<\/div>\n<\/div>\n<\/section>\n

            \n

            \u26a0\ufe0f The Terminal Purification Imperative<\/h2>\n
            \n
            \n

            The Post-FGD Carryover Crisis<\/h3>\n

            Many industrial plants install Wet Flue Gas Desulfurization (WFGD) scrubbers and assume compliance is met. However, scrubbers inherently generate microscopic gypsum droplets and saturated acid mists that pass right through standard mechanical mist eliminators. This “acid rain” violently corrodes downstream ductwork, destroys chimney stacks, and creates highly visible, legally non-compliant plumes. A WESP is the mandatory final gatekeeper to protect your infrastructure.<\/p>\n<\/div>\n

            \n

            Extreme Regulatory Pressure on PM2.5<\/h3>\n

            Global environmental protection agencies are moving past TSP (Total Suspended Particulates) and strictly enforcing PM2.5 and PM1.0 limits. Fabric filters and dry ESPs cannot capture sticky, ultrafine saturated aerosols. WESP technology is the only commercially viable method proven to consistently achieve outlet concentrations below 5 mg\/Nm3 for these complex streams.<\/p>\n<\/div>\n<\/div>\n<\/section>\n

            \n

            \ud83c\udfed Typical Application Scenarios & Industry Fit<\/h2>\n

            The Ever-power WESP1W\/240W Series is adaptable to any process emitting saturated, corrosive, or sticky particulate matter.<\/p>\n

            \"Wet<\/p>\n

            \n
            \n

            Power Generation & Boilers<\/h3>\n

            Installed immediately after Wet Flue Gas Desulfurization (WFGD) towers. Eliminates gypsum carryover, sulfuric acid mist (SO3), and fine ash, allowing power plants to hit “ultra-low emission” targets effortlessly.<\/p>\n<\/div>\n

            \n

            Lithium & New Energy Materials<\/h3>\n

            Crucial for Lithium Carbonate calcination and roasting exhaust. Captures valuable product dust that escapes dry collection systems while resisting highly corrosive chemical byproducts generated in battery material processing.<\/p>\n<\/div>\n

            \n

            Metallurgy & Calcination<\/h3>\n

            Purifies off-gases from steel sintering, lead\/zinc roasting, and new wall material workshops. Captures heavy metals, sticky tars, and condensed acids that would permanently blind traditional fabric filters.<\/p>\n<\/div>\n<\/div>\n<\/section>\n

            \n

            \u2696\ufe0f Core Advantages: WESP vs. Alternative Scrubbing Tech<\/h2>\n
            \n\n\n\n\n\n\n\n\n
            Performance Metric<\/th>\nEver-power WESP<\/th>\nHigh-Energy Venturi Scrubber<\/th>\nStandard Mist Eliminators<\/th>\n<\/tr>\n<\/thead>\n
            Sub-Micron (PM2.5) Capture<\/td>\n> 99% Efficiency. Electrostatic force pulls particles to the wall.<\/strong><\/td>\nModerate (70-80%). Relies purely on violent pressure drop and collision.<\/td>\nPoor (< 20%). Only captures large droplets > 10\u03bcm.<\/td>\n<\/tr>\n
            System Pressure Drop (\u0394P)<\/td>\nExtremely Low: 300 – 500 Pa<\/strong><\/td>\nExtremely High: 3000 – 8000+ Pa. Massive energy drain on fans.<\/td>\nLow: 150 – 300 Pa.<\/td>\n<\/tr>\n
            Acid Mist (SO3) Eradication<\/td>\nExcellent. Eliminates blue\/yellow plumes entirely.<\/strong><\/td>\nFair, but requires excessive chemical dosing to precipitate.<\/td>\nFails. Fine aerosols pass right through the chevrons.<\/td>\n<\/tr>\n
            Water Consumption<\/td>\nVery Low. Flushing water is clarified and recirculated.<\/strong><\/td>\nVery High. Constant high-pressure spraying required.<\/td>\nN\/A<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/section>\n
            \n

            \ud83c\udfc6 Why Partner with Ever-power?<\/h2>\n
            \n
            \n

            For over two decades, Ever-power has been the structural backbone of heavy industrial air purification. Designing a Wet Electrostatic Precipitator requires profound mastery over corrosion-resistant polymers, high-voltage physics in wet environments, and fluid dynamics. This cannot be outsourced to generic fabricators.<\/p>\n